Outline; Features - Ikegami HLM-905WR Operation Manual

HLM-905WR Multi-Format LCD Color Monitor

1 Outline

1-1 Outline
This 9-inch type HDTV/SDTV multi-format
color monitor employs a high-definition liquid
crystal panel for reduction in thickness, weight
and power consumption, and is designed for use
in various spaces such as sub-control rooms, ed-
iting rooms, monitor wall, transmission control
desks, and outside broadcast vans.
This monitor is compatible with the functions
and operation of the HTM/TM series CRT moni-
tors, so that it can realize the functions necessary
for a broadcasting service monitor with conven-
tional operation.

1-2 Features

(1) High performance liquid crystal panel
Employed is a liquid crystal panel with a
WXGA (1280 x 768 dots) that is excellent in basic
performances such as high brightness, high con-
trast, wide viewing angle, quick response and
good color reproducibility.
(2) Multi-format
The monitor supports various broadcasting
formats.
480i/59.94 (NTSC)
575i/50 (PAL-B)
1080psF/30
1080psF/25
1080psF/24, 23.98
1080p/60, 59.94
1080p/50
1080p/30, 29.97
1080p/25
1080p/24, 23.98
(3) Compatibility with embedded audio
Standard equipped with an embedded audio
feature, the embedded audio signals multiplexed
with 3G-SDI signal, HD-SDI signal or SD-SDI
(4:2:2) signal can be automatically recognized and
the audio output can be heard through the
built-in speaker, stereo headphones and audio
monitor output. The monitor also has a standard
embedded audio level meter display on the screen.
The embedded audio signal may be handled as
an analog output.
1035i/60, 59.94
1080i/60, 59.94
1080i/50
720p/60, 59.94
720p/50
720p/30, 29.97
720p/24, 23.98
720p/25
(4) Remote control functions
The monitor can be remote-controlled with the
use of three remote control functions. Depending
on the place of installation and type of operation,
the parallel, serial mode can be used.
In addition to the conventional parallel remote
control (pin assignment by user is possible), the
monitor also comes standard with a serial remote
input interface that enables remote control with
just one BNC coaxial cable.
Up to 99 monitors can be remote-controlled in-
dividually or concurrently using an optional serial
remote controller (during next model examina-
tion) simply with Ikagami's various monitors be-
ing loop-through connected.
(5) Built-in markers
4:3 (16:9 mode), 13:9, 14:9, 15:9, 16:9 (4:3 mode),
1.85:1 (16:9 mode) and 2.35:1 (16:9 mode) line
markers can be displayed.
The monitor can also get the 1%-stepwise
safety marker displayed in the range of 80-99%
with respect to the line marker area.
The safety markers over the effective screen
can be equally preset 1% by 1% in the range of
80-99%.
The monitor also comes standard abundantly
with five-part split and ten-part split crosshatch
markers useful for location alignment.
(6) User marker display function
Up to 10 different user markers, such as line
and box markers, are presettable pixel by pixel to
your desired positions and sizes. The line and box
drawing settings can be easily made with not just
the switch but also the USB mouse. Resulting
complicated data may also be saved on a USB
memory so that the data can be copied to another
monitor or stored in a PC.
This function is optimum for positioning in ed-
iting the layout and its display for various types
of information such as teleshopping.
* Patent pending
- 1 -