To Connect To Your Network - HP 1670A Series User Manual

To connect to your network
1
Tum off the logic analyzer.
Connecting and Configuring
To connect to your network
2 Connect the analyzer to your network using an RJ-45 or BNC
connector.
Ethertwist and thinlan are the two most common types of LAN network
connection. Ethertwist uses unshielded twisted pair and an RJ-45 connector,
and resembles a standard modular phone line. Thinlan uses coaxial cable. If
you are unsure what your network uses for its physical connection, contact
your local network administrator.
The logic analyzer LAN ports are on the back panel. The RJ-45 connector
goes in the port labeled "LAN-TP" and the BNC attaches to the port labeled
"LAN-BNC".
3 Tum on the logic analyzer.
1-3
I