Set up the logic analyzer
Press the Config key.
1 1
Unassign Pods 3 and 4, Pods 5 and 6, and Pods 7 and 8. To unassign the pods, select
2 2
the pod field. In the pop-up menu, select Unassigned.
Connect the logic analyzer
Using the 17-by-2 test connector, BNC cable, and probe tip assembly, connect the
1 1
data and clock channels of pod 1 to one side of the BNC Tee.
Using a BNC-banana cable, connect the voltmeter to the other side of the BNC Tee.
2 2
Connect the BNC Tee to the Main Signal output of the function generator.
3 3
Testing Performance
To test the threshold accuracy (logic analyzer)
3–9