Configuration Capabilities
The HP 16550A can be configured as a single- or two-card module. The
number of data channels range from 102 channels using just one HP 16550A,
up to 204 channels when a second HP 16550A is connected. A half-channel
acquisition mode is available which reduces the channel width by half, but
doubles memory depth from 4K-deep to 8K-deep per channel.
The configuration guide below illustrates the channel width and memory
depth combinations in all acquisition modes with a one or two card module.
State Analyzer
•
Unused clock channels can be used as data channels
•
Time or State tags reduces memory by half. However, full depth is
retained if you leave one pod pair unassigned.
•
Maximum of 6 clocks in a two-card module.
Timing Analyzer
•
Unused clock channels can be used as data channels
General Information
Configuration Capabilities
1–3