Command Mode; Readings In Trovis-View; Operating Values; Operating States - Samson 5827 Mounting And Operating Instructions

Hide thumbs Also See for 5827:

Table of Contents

Operation

Transferring data onto a computer

1. Insert the memory pen together with modular adapter into the serial interface (COM

port) of the computer (see Annex for accessories).

2. Select 'Read Logged Data' from the 'Memory Pen' menu.

3. Select the desired target directory. If the target directory is not changed, data will be

saved in the SAMSON folder > Type 5827.

4. Enter the file name.

5. Click 'Save' to start data transmission.

8.4.3

Command mode

In closed-loop operation, the actuator stem can be moved to the top or bottom end position

using the command pen regardless of the input signal.

Possible settings:

− No command

− Retract actuator stem

− Extend the actuator stem

8.5.1

Note

The values in the Operating values folder cannot be changed.

In online mode, the current operating values are listed in the 'Operating values' folder. De-

pending on the basic setting, a graph is shown under the 'Operating values' window.

8.5.2

Error messages can be read in the 'Service' folder ('Operating states').

Note

Operating states and errors are also indicated by the LEDs (see section 8.2).

8-8

EB 5827-2 EN

Table of Contents