Readings In Trovis-View; Operating Values; Operating States; Status Messages - Samson 5857 Mounting And Operating Instructions

Operation

8.5 Readings in TROVIS-VIEW

8.5.1

Operating values

Note
The values in the Operating values folder cannot be changed.
In online mode, the current operating values are listed in the 'Operating values' folder. De-
pending on the basic setting, a graph is shown under the Operating values window.
8.5.2

Operating states

Error messages can be read in the Service folder (Operating states).
Note
Operating states and errors are also indicated by the LEDs (see section 8.2.1).
8.5.3

Status messages

In the Service folder (Status messages), device and operation parameters are shown.
Device
Operation
Actuator strokes
8-10
Firmware version
Serial number
Device information
Manufacturing parameters
Operating hours
Operating hours at excess temperature
Temperature inside device
Highest temperature inside device
Lowest temperature inside device
Motor running time
Attempts
Changes in direction
in h
in h
in °C
in °C
in °C
in h
EB 5857 EN