Readings In Trovis-View; Operating Values; Operating States; Functions - Samson TROVIS 5757-7 Mounting And Operating Instructions

Electric actuator with process controller for heating and cooling applications

Hide thumbs Also See for TROVIS 5757-7:

Table of Contents

Operation

8.5 Readings in TROVIS-VIEW

8.5.1

In online mode, the current operating values are listed in the 'Operating values' folder. De-

pending on the basic setting, a graph is shown under the 'Operating values' window.

Note

The values in the 'Operating values' folder cannot be changed.

8.5.2

Error messages can be read in the 'Service' folder ('Operating states').

Note

Operating states and errors are also indicated by the LEDs (see section 8.2 and the 'Mal-

functions' section).

8.5.3

In the 'Service' folder ('Functions'), the following functions are shown:

Manual level

Functions

The functions can be executed when communication between the actuator and computer is

established.

8-6

Î Manual level

Î Perform reset

Î Load default settings in actuator

Î Start transit time measurement

EB 5757-7 EN

Table of Contents