Symbols On The Battery Charger; Operating States/Error Signals; Signals For Operating States - Otto Bock Genium 3B1 Instructions For Use Manual

Appendices
In some jurisdictions it is not permissible to dispose of these products with unsorted household
waste. Disposal that is not in accordance with the regulations of your country may have a detri­
mental impact on health and the environment. Please observe the instructions of your national
authority pertaining to return and collection.
Declaration of conformity according to the applicable European directives
Serial number
Caution, hot surface

16.1.2 Symbols on the battery charger

Legal manufacturer
Lot number
Declaration of conformity according to the applicable European directives
Protection against penetration of solid foreign objects with a diameter greater than 1 mm, no pro­
tection against water
Protect from moisture
In some jurisdictions it is not permissible to dispose of these products with unsorted household
waste. Disposal that is not in accordance with the regulations of your country may have a detri­
mental impact on health and the environment. Please observe the instructions of your national
authority pertaining to return and collection.

16.2 Operating states/error signals

The prosthesis indicates operating states and error messages through beeps and vibration signals.

16.2.1 Signals for operating states

Battery charger connected/disconnected
Beep signal
1x short
Mode switching
INFORMATION
When mute mode (silent mode) is activated, no beep and vibration signals are generated.
Beep signal Vibration sig­
nal
1x short 1x short
90 | Ottobock
Vibration signal
3x long
1x before beep signal
Additional action performed
Mode switching using the Cockpit
app or remote control
Event
Charging mode started (3 sec. after connecting the bat­
tery charger)
Self-test completed successfully, product is operational
Event
Mode switching performed using the
Cockpit app or remote control.
Genium 3B1/3B1=ST