8
Fuel injection pump timing
To check
Special requirements
High pressure fuel pipes
Low pressure fuel pipes
Note: The method used to check the timing of the fuel injection pump is spill timing.
The timing marks on the crankshaft pulley and on the timing case are not accurate enough when the engine
is spill timed.
Clockwise / counter-clockwise direction is when seen from the front of the engine.
With the dial gauge still on the first valve, rotate the crankshaft counter-clockwise until the dial gauge pointer
moves counter-clockwise 5,08 mm (0.20 in).
118
This document has been printed from SPI². Not for Resale
Torque Nm (lbf ft) kgf m
27 (20) 2,7
Delivery valve holder
20 (15) 2,0
Operation 8-2
Workshop Manual, TPD 1392E, issue 3
700 Series
43 (32) 4,3
Continued