Flywheel And Housing - Perkins UA Workshop Manual

700 Series
13

Flywheel and housing

13
Flywheel
To remove and to fit Operation 13-1
Special requirements
POWERPART products
Torque Nm (lbf ft) kgf m
Description Part number
Setscrews 100 (74) 10,2 Retainer (oil tolerant) 21820603
Warning! The flywheel is very heavy, use lift equipment or get assistance with the lift operation before
removal of the flywheel fasteners.
Remove two opposite setscrews from the flywheel and fit temporarily two guide studs to ensure safety when
the flywheel is removed and fitted. Apply POWERPART Retainer (oil tolerant) to the first three threads of the
setscrews.
Workshop Manual, TPD 1392E, issue 3 173
This document has been printed from SPI². Not for Resale