Aluminium Sump - Perkins UA Workshop Manual

10

Aluminium sump

To remove and to fit
Special requirements
Torque Nm (lbf ft) kgf m
Setscrews
Drainplugs
Refer to Operation 10-2 for renewal of engine oil.
Note: Some agricultural applications have an engine with a divided sump to allow for a drive shaft. If this sump
is used, both drain plugs must be removed, to ensure that all of the lubricating oil is drained.
When refitting, put a bead of POWERPART Silicone adhesive along the flange of the sump.
134
This document has been printed from SPI². Not for Resale
22 (16) 2,2
34 (25) 3,5 Silicone adhesive
Operation 10-4
POWERPART products
Description
Workshop Manual, TPD 1392E, issue 3
700 Series
Part number
21826038