Rear Oil Seal - Perkins UA Workshop Manual

5
700 Series

Rear oil seal

To remove Operation 5-3
Cautions:
l When the screws (self tapping) are fitted to the seal, do not damage the crankshaft palm or the recess for
the oil seal.
l Use suitable levers to remove the oil seal.
Note: Fit the screws 180° apart.
Service operations
Remove the flywheel, see Operation 13-1.
Remove the flywheel housing, see Operation 13-4.
80 Workshop Manual, TPD 1392E, issue 3
This document has been printed from SPI². Not for Resale