Connecting Rod - Perkins UA Workshop Manual

700 Series

Connecting rod

To check for bend and to inspect
Cautions:
l Do not use a letter stamp to mark the connecting rod. The new letter must be engraved onto the big-end of
the connecting rod.
l If the original piston is used, ensure that it is assembled to the correct connecting rod and is used in the
original cylinder.
l The top of the piston must not be machined to obtain the correct height.
Workshop Manual, TPD 1392E, issue 3
This document has been printed from SPI². Not for Resale
4
Operation 4-10
Continued
67