Explanations Of The Object Description - WAGO 750-872/020-000 Manual

182 • EtherNet/IP (Ethernet/Industrial Protocol)
Object model
Class
A3
A4
A5
A6
A7
A8
A9
AA
AB
AC
AD

4.3.3.2.3 Explanations of the Object Description

Attribute ID:
Access:
NV:
Name:
Data type:
Description:
Default value: Factory settings
Name
Output fieldbus variable USINT
hex
Output fieldbus variable USINT Extended 1
hex
Output fieldbus variable USINT Extended 2
hex
Input fieldbus variable UINT
hex
Input fieldbus variable UINT Extended 1
hex
Output fieldbus variable UINT
hex
Output fieldbus variable UINT Extended 1
hex
Input fieldbus variable UDINT
hex
Input fieldbus variable UDINT Offset UINT
hex
Output fieldbus variable UDINT
hex
Output fieldbus variable UDINT Offset UINT
hex
Integer value which is assigned to the corresponded attribute
Set The attribute can be accessed by means of Set_Attribute services.
Important: All the set attributes can also be accessed by means of
Get_Attribute services.
Get The attribute can be accessed by means of Get_Attribute services
NV (non volatile) The attribute is permanently stored in the controller.
V (volatile)
Note: If this column is missing, all attributes have the type V
Designation of the attribute
Designation of the CIP data type of the attribute
Short description for the Attribute
The attribute is not permanently stored in the controller.
WAGO-I/O-SYSTEM 750
ETHERNET TCP/IP