Compatibility - WAGO 750-872/020-000 Manual

The controller is based on a 32-bit CPU and is capable of multitasking (i.e.,
several programs can be run at the same time).
The controller has an internal server for web-based applications. By default,
the controller's built-in HTML pages contain information on the configuration
and status of the PFC, and can be read using a normal web browser. In
addition, a file system is implemented that allows you to store custom HTML
pages in the controller using FTP download.

3.1.2 Compatibility

Programming tool:
WAGO-I/O-PRO CAA
759-333
Controller:
750-872/020-000
For programming, the fieldbus controller 750-872/020-000 with the Firmware
version SW ≥ 11 supports the software version V 2.3.8.x of the
WAGO-I/O-PRO CAA 759-333 (Programming Tool IEC 61131-3; CAA,
CoDeSys Automation Alliance).
Attention
With additional target files, the fieldbus controller 750-872/020-000 supports
already also the software version V 2.3.7.2 of WAGO I/O PRO CAA
759-333. Please order these necessary target files for addition from the
WAGO service under: WAGO technical support
via phone: +49 (0) 571/8 87 –555 or E-Mail: support@wago.com.
WAGO-I/O-SYSTEM 750
ETHERNET TCP/IP
Fieldbus Controller 750-872/020-000
Compatible Versions
V2.3.7.2
with restriction compatible
(see the note below!)
SW ≥ 11
(Delivery status SW = 11)
Compatibility
V2.3.8.x
(recommended)
SW ≥ 11
(Delivery status SW = 11)
• 41