WAGO 750-872/020-000 Manual page 257

The specialty modules represent 1x8 bytes input and output data and seize 1
Instance in Class (0x67) and 1 Instance in Class (0x68).
Vibration Velocity/Bearing Condition Monitoring VIB I/O
750-645
The Vibration Velocity/Bearing Condition Monitoring VIB I/O has a total of
12 bytes of user data in both the Input and Output Process Image (8 bytes of
module data and 4 bytes of control/status). The following table illustrates the
Input and Output Process Image, which have 8 words mapped into each
image. Word alignment is applied.
The specialty modules represent 4x3 bytes input and output data and seize 4
Instances in Class (0x67) and 4 Instances in Class (0x68).
WAGO-I/O-SYSTEM 750
ETHERNET TCP/IP
Input and Output Process Image
Byte Destination
Offset
High Byte
0 C1/S1
1 D1
2 D3
3 D5
Input and Output Process Image
Byte Destination
Offset
High Byte
-
n
D1
-
n+1
D3
-
n+2
D5
-
n+3
D7
Process Data Architecture for EtherNet/IP
Low Byte
extended
C0/S0
Control/Status byte
D0
D2
D4
Low Byte
C0/S0 Not used
D0
(log. channel 1, Sensor input 1)
C1/S1 Not used
D2
(log. channel 2, Sensor input 2)
C2/S2 Not used
D4
(log. channel 3, Sensor input 1)
C3/S3 Not used
D6
(log. channel 4, Sensor input 2)
I/O Modules
Remark
Control/Status
byte
Data bytes
Remark
Control/Status
byte
(log. channel 1,
Sensor input 1)
Data bytes
Control/Status
byte
(log. channel 2,
Sensor input 2)
Data bytes
Control/Status
byte
(log. channel 3,
Sensor input 1)
Data bytes
Control/Status
byte
(log. channel 4,
Sensor input 2)
Data bytes
• 249