Access Control - Tenda V1200 User Manual

7.7

Access control

This function allows you to use the HTTP, ICMP, SSH, TELNET, SNMP, FTP, TFTP and HTTPS to manage
the modem router from LAN or WAN side.
Choose Management > Access Control to enter the configuration page.
Parameter description
Parameter
HTTP
ICMP
SSH
TELNET
SNMP
FTP
Description
After it is enabled, users can manage the modem router using HTTP protocol through
the browser from the corresponding sides (LAN or WAN). This method is acceptable
for most users.
After it is enabled, it allows users to ping the modem router from the corresponding
sides (LAN or WAN) for connectivity diagnosis.
After it is enabled, users can manage the modem router through the Secure Shell
connection (SSH).
After it is enabled, users can use TELNET to establish a connection with the device,
and visit the command-line interface of the device from the corresponding sides (LAN
or WAN).
After it is enabled, the SNMP management software can establish a connection with
the device, and check some parameters of the device through MIB nodes from the
corresponding sides (LAN or WAN).
After it is enabled, the modem router servers as a server and users can use FTP
protocol to check, upload, or download files of the device from the corresponding
sides (LAN or WAN).
217