Tenda V1200 User Manual page 207

3. Bridge Restrict turns to Enabled automatically, click Apply/Save.
----End
Ensure the channel and bandwidth are the same with the router you want to bridge.
Otherwise, the SSID (wireless network name) will not show in the list.
5.2.4.3 Example of configuring the wireless bridge function
Network requirement
User A purchases a wireless router for wireless coverage in his apartment. The router (Router A) is
placed in the living room. The WiFi signals are strong in the living room, but too weak in the
bedroom and study room. Now user A want to improve internet connectivity in the bedroom and
study room.
Solution
To improve internet connectivity in the bedroom and study room, the user can add a V1200 modem
router and configure the wireless bridge function of the router to extend the 5 GHz WiFi network
coverage. That will eliminate blind areas in the apartment, enabling the user to access the internet
anywhere in the apartment.
Assume that:
The upstream wireless router uses the following wireless settings for 5 GHz.
Parameter
Wireless Network Name
Wireless Network
Password
Wireless Encryption
Wireless Channel
Description
Tenda_5G_123456
12345678
Mixed WPA2/WPA-PSK, AES
149
197