Tenda V1200 User Manual page 136

Parameter description
Parameter Description
Name It specifies the description of the QoS queue rule.
Enable It specifies whether to enable the QoS queue rule.
Interface It specifies the interface to which the QoS queue rule applies.
It specifies the precedence value of the queue.

Queue Precedence

It specifies the weight of the queue. You can specify the queue weight for the queues
Queue Weight
with the same precedence.
Drop Algorithm It specifies the default queue drop algorithm. It cannot be changed.
DSL Latency It specifies the DSL latency mode of the ATM interface.
Ethernet interface

Parameter description
Parameter Description
Name It specifies the description of the QoS queue rule.
Enable It specifies whether to enable the QoS queue rule.
Queues with the same precedence: It is scheduled using WRR and WFQ, and the device
assigns the bandwidth based on the queue weight.
Queues with different precedence: It is scheduled according to the precedence value.
126