Tenda V1200 User Manual page 21

Step 4 Country/Region: Select your country or region.
Step 5 ISP: Select your ISP.
Step 6 Auto PVC scan: Select your country or region from the drop-down list, and the VPI and VCI
values will be automatically populated.
If your country/region and ISP are not available in the drop-down list or the VPI and VCI
values are incorrect, select Other both from the Country/Region and ISP lists, and enter
the VPI and VCI values manually.
If you are uncertain about the VPI and VCI, select Auto PVC scan.
Step 7 Enter other internet parameters provided by your ISP (if any).
Step 8 Click OK on the bottom of the page to apply the settings.
If you cannot access the internet after completing the primary settings, contact your ISP for
help.
----End
Ethernet cable connection
If you connect the modem router to the internet with an Ethernet cable, refer to the configuration
in this part to complete your internet settings. In this case, this device only serves as a wireless
router.
PPPoE
Use this type if you can access the internet only after setting up a dial-up connection on the
computer using a user name and password provided by your ISP.
Step 1 Enter the Home page.
Step 2 Link Type: Select Ethernet.
Step 3 Connection Type: Select PPPoE.
11