Advertisement
Quick Links
Quick Installation Guide
N300 Wi-Fi VDSL/ADSL Modem Router
V300
Package contents
Modem router
Power adapter
Ethernet cable (RJ45)
Phone cable (RJ11)
DSL splitter
Quick installation guide
This guide offers a basic introduction of the modem router and walks you through Quick Setup. For product or
function details, please go to www.tendacn.com
Advertisement
Related Manuals for Tenda V300
Summary of Contents for Tenda V300
- Page 1 Quick Installation Guide N300 Wi-Fi VDSL/ADSL Modem Router V300 Package contents Modem router Power adapter Ethernet cable (RJ45) Phone cable (RJ11) DSL splitter Quick installation guide This guide offers a basic introduction of the modem router and walks you through Quick Setup. For product or...
-
Page 2: Get To Know Your Device
Get to know your device LED indicators Color Status Description Indicator Solid on The device completes startup and is working properly. Green The device is upgrading or is performing read-write operations. Blinking (Power LED Do not power off the device. indicator) The device is powered off. - Page 3 (DSL LED Blinking The DSL negotiation is under way. indicator) No phone cable is connected or the phone cable is disconnected.
-
Page 4: Ports And Buttons
Ports and buttons Button/Port Description DSL port. If you intend to set up the modem router for DSL service, this port is used to connect to the phone jack for internet access. 10/100 Mbps auto-negotiation LAN ports. Used to connect to wired devices, such as 1/2/3 computers and IPTV set top boxes. - Page 5 I Install the modem router The modem router can be installed either on wall or desktop. Recommended specifications of screws and plastic anchors you may use in the wall-mounting scenario are: Screws: PA3*14mm Plastic anchors: 2.4mm in inner diameter and 26.4mm in length...
- Page 6 II Connect the modem router If you do not need phone service, directly use a phone cable to connect the phone jack to the DSL port of the modem router, and then perform step 4 and 5. Otherwise, perform the following steps one by one. 1.
- Page 7 III Configure the modem router 1. Start a web browser on a device connected to the modem router, enter 192.168.1.1 in the address bar, and visit it. (Computer is taken as an example here) 2. Enter the login user name and password, and click Login. (The default user name and password are both admin) Tips: To ensure network security, please change your password once logged in.
- Page 8 Tips: • VDSL link type and PPPoE connection type are used here as an example. • If you switch to a different link type after finishing the configurations for the previous link type, a prompt message “Configuration conflict” may appear. In this case, perform all the steps again to reconfigure the modem router. If you want to enter the VLAN parameters manually, deselect Auto Vlan scan and fill in the parameters.
- Page 9 set.
- Page 10 Q1: I cannot log in to the web UI of the modem router. What should I do? If you are using a wireless device, such as a smartphone: Verify that the device connects to the WiFi network of the modem router. ...
- Page 11 Q4: I forget my WiFi password (Wireless Key). What should I do? Use an Ethernet cable to connect your computer to the modem router, log in to the web UI and navigate to module to check the password. Wi-Fi Settings ...
- Page 12 RJ45 cable. Declaration of Conformity Hereby, SHENZHEN TENDA TECHNOLOGY CO., LTD. declares that the radio equipment type V300 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.tendacn.com/en/service/download-cata-101.html...
- Page 13 © 2021 Shenzhen Tenda Technology Co., Ltd. All rights reserved. Tenda is a registered trademark legally held by Shenzhen Tenda Technology Co., Ltd. Other brand and product names mentioned herein are trademarks or registered trademarks of their respective holders. Specifications...