Multicast - Tenda V1200 User Manual

4.20

Multicast

Multicast (one-to-many or many-to-many distribution) is the group communication where
information is addressed to a group of destination computers simultaneously. Multicast can be used
for one-to-many networking applications such as online streaming video and gaming, and allows
more efficient use of resources when supporting these types of applications.
To configure multicast function, choose Advanced Setup > Multicast.
Multicast Precedence: Set the priority for the multicast data. A smaller value indicates a higher
priority.
Parameter description
Parameter
Default Version
Query Interval
Query Response
Interval
Last Member Query
Interval
Robustness Value
Maximum Multicast
Groups
Maximum Multicast
Data Sources (for
IGMPv3)
Description
It specifies the IGMP version for WAN. The default is IGMPv3.
It specifies the interval for sending IGMP query message. The default is 125. The
value range is 1 to 999. The unit is second.
It specifies the response interval for the query message. The default is 10. The value
range is 1 to 999. The unit is "second".
It specifies the interval for sending query message of specified group. The default is
10. The value range is 1 to 999. The unit is second.
It specifies the robustness value of IGMP querier. The default is 2. The value range is
1 to 999.
It specifies the maximum number of multicast groups for each interface. The default
is 25. The value range is 1 to 32.
It specifies the maximum number of multicast data sources. The default is 10. The
value range is 1 to 24.
165