Wireless Access Control - Tenda W268R User Manual

11n wireless-n broadband router with internal antenna

Hide thumbs Also See for W268R:

Table of Contents

the Wireless MAC address of the connecting device into

the Router's AP MAC address table or select one from

the scanning table.

Repeater Mode：In this mode, add the opposing MAC

address into their individual AP MAC address table by

manual or scanning to enlarge and extend the wireless

radio.

Encrypt Type: Select one from WEP, TKIP, or AES for

security here.

Pass phrase: Enter the encrypted key for wireless

devices.

AP MAC: Input the MAC address of another (opposing)

wireless router you want to connect.

NOTE:

It is recommended that two wireless routers keep

the

same

security settings. Apply the settings and reboot

the router to activate it.

6.6 Wireless Access Control

To secure your wireless LAN, the wireless access control is

actually based on the MAC address management to allow or

block the specific clients to access the wireless network.

Select "Wireless Setting->Access Control" to display the

following screen:

11N Wireless Broadband Router

bandwidth,

channel

number,

and

Table of Contents