Tenda V1200 User Manual page 176

Parameter
Maximum Multicast
Group Members
Fast Leave Enable
Parameter description
Parameter
Default Version
Query Interval
Query Response
Interval
Last Member Query
Interval
Robustness Value
Maximum Multicast
Groups
Maximum Multicast
Data Sources (for
mldv2)
Maximum Multicast
Group Members
Description
It specifies the maximum number of multicast group members. The default is 25. The
value range is 1 to 32.
If the function is enabled, the modem router does not send group specific-queries
when it receives a leave message.
Description
It specifies the MLD version for WAN. The default is MLDv2.
It specifies the interval for sending MLD query message. The default is 125. The value
range is 1 to 999. The unit is second.
It specifies the response interval for the query message. The default is 10. The value
range is 1 to 999. The unit is "second".
It specifies the interval for sending query message of specified group. The default is
10. The value range is 1 to 999. The unit is second.
It specifies the robustness value of MLD querier. The default is 2. The value range is 1
to 999.
It specifies the maximum number of multicast groups for each interface. The default
is 10. The value range is 1 to 16.
It specifies the maximum number of multicast data sources. The default is 10. The
value range is 1 to 16.
It specifies the maximum number of multicast group members. The default is 10. The
value range is 1 to 16.
166