Tenda V1200 User Manual page 59

Step 3 Select IP over Ethernet.
Step 4 Enter the 802.1P Priority and 802.1Q VLAN ID, and select the VLAN TPID according to the
VLAN parameters provided by your ISP.
Step 5 Select IPv4&IPv6(Dual Stack) and click Next.
Step 6 Set the WAN IP address.
Obtain an IP address automatically: If your ISP does NOT provide you with the IP address
−
information, select this option.
Use the following Static IP address: If your ISP provides you with the IP address
−
information, select this option and enter them.
Step 7 Set other parameters as required, and click Next.
49