Access Control; Overview; Allow Certain Clients To Access The Wi-Fi Network - Tenda N300 Wi-Fi xPON ONT User Manual

5.4

Access control

5.4.1

Overview

On this page, you can add and delete access control rules to decide which clients can or cannot
connect to all the Wi-Fi networks in the frequency band.
To access the page, log in to the web UI of the ONT and choose WLAN > Access Control. Rules
added are shown in Current Access Control List.
Parameter description
Parameter Description
It specifies the control mode.
⚫ Disabled: It indicates that the access control function is disabled.
Allow Listed: It indicates that only clients with the MAC addresses added to the list can
⚫
Mode
connect to the Wi-Fi network.
Deny Listed: It indicates that clients with the MAC addresses added to the list cannot
⚫
connect to the Wi-Fi network.
MAC Address It specifies the MAC address of the client to be controlled.
5.4.2

Allow certain clients to access the Wi-Fi network

Assume that you only want to enable a smartphone and a tablet to access your Wi-Fi network and
prevent misuse of others. The MAC addresses of smartphone and tablet are:
Smartphone: 8E:5B:54:F6:E1:00
−
Tablet: 8C:EC:4B:B3:04:92
−
Configuring procedure:
Step 1 Choose WLAN > Access Control on the web UI.
Step 2 Select Allow Listed for Mode, and click Apply Changes.
21
WLAN