Tenda 4G680 User Manual

Tenda 4G680 User Manual

Wireless n300 4g lte and volte router

Advertisement

 
 
Wireless  N300  4G  LTE  and  VoLTE  Router  4G680
User Guide
 

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 4G680 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Tenda 4G680

  • Page 1     Wireless  N300  4G  LTE  and  VoLTE  Router  4G680 User Guide 1   ...
  • Page 2                   Copyright Statement  © 2019 Shenzhen Tenda Technology Co., Ltd. All rights reserved.    is a registered trademark legally held by Shenzhen Tenda Technology Co., Ltd. Other  brand and product names mentioned herein are trademarks or registered trademarks of their  respective holders. Copyright of the whole product as integration, including its accessories and  software, belongs to Shenzhen Tenda Technology Co., Ltd. No part of this publication can be  reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language  in any form or by any means without the prior written permission of Shenzhen Tenda Technology  Co., Ltd.  Disclaimer  Pictures, images and product specifications herein are for references only. To improve internal  design, operational function, and/or reliability, Tenda reserves the right to make changes to the  products without obligation to notify any person or organization of such revisions or changes.  Tenda does not assume any liability that may occur due to the use or application of the product  described herein. Every effort has been made in the preparation of this document to ensure  accuracy of the contents, but all statements, information and recommendations in this document  do not constitute a warranty of any kind, express or implied.  i   ...
  • Page 3   Preface  Thank you for choosing Tenda! Please read this user guide before you start with 4G680.  Conventions  The typographical elements that may be found in this document are defined as follows.  Item  Presentation  Example  Cascading menus  >  System > Live Users  Parameter and value  Bold  Set User Name to Tom.  Variable  Italic  Format: XX:XX:XX:XX:XX:XX  UI control  Bold  On the Policy page, click the OK button.  Message  “ ”  The “Success” message appears.    The symbols that may be found in this document are defined as follows.  Symbol  Meaning  This format is used to highlight information of importance or special interest. Ignoring  this type of note may result in ineffective configurations, loss of data or damage to    device.  This format is used to highlight a procedure that will save time or resources.      Acronyms and Abbreviations  Acronym or Abbreviation  Full Spelling  APN  Access Point Name  DHCP ...
  • Page 4   Acronym or Abbreviation  Full Spelling  NAT  Network Address Translation  PLMN  Public Land Mobile Network  PPPoE    Point‐to‐Point Protocol over Ethernet  PPTP  Point to Point Tunneling Protocol  Quality of Service   QoS  SSID  Service Set Identifier  URL    Uniform Resource Locator  USSD  Unstructured Supplementary Service Data  WPS  WiFi Protected Setup  WAN  Wide Area Network  Getting more documents  If you want to get more documents of the device, visit www.tendacn.com and search for the  corresponding product model. The related documents are listed as below:  Document  Description  It introduces how to set up the device quickly for internet access, the descriptions  Quick Installation Guide  of LED indicators, ports, and buttons, FAQ, statement information, and so on.  It introduces how to set up more functions of the device for more requirements,  User Guide  including all functions on the web UI of the device.  It introduces the basic information of the device, including product overview,  Data Sheet ...
  • Page 5   Technical Support  If you need more help, contact us by any of the following means. We will be glad to assist you as  soon as possible.    Global: (86) 755‐27657180      (China Time Zone)    United States: 1‐800‐570‐5892      (Toll Free: 7 x 24 hours)  support@tenda.com.cn  Hotline  Email  Canada: 1‐888‐998‐8966  (Toll Free: Mon ‐ Fri 9 am ‐ 6 pm PST)  Hong Kong: 00852‐81931998      iv   ...
  • Page 6: Table Of Contents

      Contents  Product overview ..........................  1     1.1 What it does ...........................  1   1.2 Main features .........................  1   1.3 Appearance ..........................  2   1.3.1 LED indicators  ......................  2   1.3.2 Ports & bottons ......................  3   1.3.3 Label ..........................  4   Quick setup ...........................  5     Login ..............................  7     Status  .............................  8     WAN .............................. ...
  • Page 7   7.5 Draftbox  ..........................  2 8   7.6 Settings SMS  .........................  2 9   7.6.1 Set SMSC ........................  2 9   7.6.2 Set SMS storage location  ...................  2 9   7.6.3 Set SMS receipt ......................  2 9   WiFi .............................  3 0     8.1 Specify basic settings of your wireless network ..............  3 0   8.1.1 Enable/Disable the wireless network ...............  3 2   8.1.2 Hide SSID ........................ ...
  • Page 8: Product Overview

      1  Product overview  1.1  What it does  4G680 is a domestic router which offers internet access through both SIM card and broadband.  The router can be managed through a designed web UI, and supports varied settings and functions,  such as SMS, data and user management. With its compact appearance, convenient connection,  various advanced functions and designed web UI, you are assured high‐speed, smooth and stable  internet connection at home covered by the router.    1.2  Main features  Supports internet access through SIM card connection.   Supports DHCP server.   Supports SMS sending and receiving, USSD.   Supports MAC filter.   Supports fast connection through WPS.   Supports DMZ and NAT advanced settings.   Supports QoS and TR069 functions.   Supports virtual server function.       1   ...
  • Page 9: Appearance

      1.3  Appearance  1.3.1  LED indicators  1  2  3    SN  LED Indicator  Color  Status  Description  Green  Solid on  The router is powered on properly.  1  POWER  /  Off  The router is powered off or not powered on properly.  Solid on  The WiFi feature is enabled.  At least one device is connected to the wireless  Green  Slow blinking  network of the router.  2  WiFi  Fast blinking  The router is performing WPS negotiation.  /  Off  The WiFi feature is disabled.  At least one device is connected to the LAN port of the  Green  Blinking  router.  3  LAN ...
  • Page 10: Ports & Bottons

      SN  LED Indicator  Color  Status  Description  Blinking  Data is being transmitted over the WAN port.  Red  Solid on  No SIM card or no network network service.  Signal  It indicates the 3G/2G signal strength of the  5  strength LED  Green (1 to 4 bars)  router.  indicator  1.3.2  Ports & bottons    6  7  8  9  10    SN  Port/Button  Description  6  POWER ON/OFF  Power on/off button. Used to turn on/off the router.  7  Power jack. Used to connect to the included power adapter for power supply.    LAN port. Used to connect to Ethernet devices, such as computers, switches, and  8  1  so on.  9 ...
  • Page 11: Label

      13  SIM  SIM card slot. Used to insert the SIM card.  1.3.3  Label  This label is located at the rear panel of the router. The details of the label are shown as below.  (1)  (2)  (4)  (3)      (1) The product name of the router.  (2) The default IP address and the login user name and key of the router.  (3) The default SSID and WiFi key of the router.  (4) MAC address of the router. The default SSID of the router is Tenda_XXXX, where XXXX indicates  the last 4 characters of this MAC address.  4   ...
  • Page 12: Quick Setup

      2  Quick setup   The router provides quick internet access by inserting a SIM card.  Insert a standard SIM card into the slot on the bottom panel.  Step 1      A full‐size SIM card is required for the router. A micro or nano SIM card must be converted using a  SIM card adaptor.   Mind the direction when inserting the SIM card.  Use the included power adapter to power on the router, and press the power button. The  Step 2 POWER indicator lights solid on.  When the INTERNET indicator blinks blue or green, and the Signal Strength LED indicator  lights green (1 to 4 bars), the router is connected to the internet successfully.    5   ...
  • Page 13     When the INTERNET indicator lights solid red:   Check if the SIM card is inserted correctly or locked. To unlock the SIM card, please refer to Unlock  and lock a SIM card.   If you have obtained APN parameters from your ISP, you can refer to APN setting to manually  create an APN profile and connect to the internet.  To access the internet:  Step 3  Connect your wireless devices to the wireless network.     You can find the default SSID (WiFi name) and default WiFi key on the label on the back of the  router.   To change the default SSID (WiFi name) and WiFi key of the router, see Change your WiFi name  and password.   Connect your wired devices to the port 1 or 2.      ‐‐‐End  6   ...
  • Page 14: Login

      3  Login  Procedures for accessing the web UI of the router:  Use the included power adapter to power on the router.  Step 1 Use a mobile device to connect to the wireless network of the router, or connect your  Step 2 computer to the port 1 using an Ethernet cable.  Start a web browser on your connected device, and visit the default IP address of the  Step 3 router: 192.168.0.1.  Enter the default Account and Password (both are admin by default), and click Login.  Step 4   ‐‐‐End  After Logging in to the web UI successfully, you will be directed to the Home page.       If the above pages do not appear, please set the local connection of your computer to Obtain an IP  address automatically and Obtain DNS server address automatically. For more information about    how to set the IP address of your computer, please refer to Appendix   7   ...
  • Page 15: Status

      4  Status  You can view the system status in the Home page of the Web UI. The Home page displays  configurations and status of the router, including LAN, 4G/3G/2G Modem, System, Internet Status,  IPv4 WAN, IPv6 WAN, and Mobile Network.    Parameter  Description  It displays the LAN information of the router, including LAN IP address, subnet Mask,  LAN  and the number of clients connected to the router.  4G/3G/2G Modem  It displays the connection status of SIM card and relevant information.  It displays the uptime, which means the total operating time of the router since it is  System  powered on recently.  Internet Status  It displays the data allowance settings and traffic statistics.  Dial Type  It displays the connection type of the router.  IPv4 WAN  It displays the IP address information of IPv4 connection.  IPv6 WAN  It displays the IP address information of IPv6 connection.  Mobile Network  It displays the transmitted and received traffic through IPv4 and IPv6.  8   ...
  • Page 16: Wan

      5  WAN  5.1  Connection  You can set Preferred Cellular Network and Roaming Mode in this page.    Parameter  Description  Preferred cellular network enables you to choose a more desirable network which  uses either IPv4 or IPv6 protocol. The available options include Auto Mode and  Manual Mode.  Preferred Cellular   Auto mode: The router chooses the suitable network type automatically. Under  Network  this mode, you cannot disconnect any WAN status.   Manual mode: You can choose the desired network, using either IPv4 or IPv6. You  can also enable or disable any WAN status.  Enable or disable data roaming for the SIM card inserted in the router.  Roaming mode  Data roaming means the data usage produced when you are outside the coverage of  your ISP. You can disable data roaming to avoid roaming data usage.  It specifies the IP family that the router uses to access the internet. You can enable or  WAN Status  disable any of them under Manual Mode.  It specifies the internet protocol version used to access the internet. Available options  IP Family  include IPv4 and IPv6.      9   ...
  • Page 17: Connection Setting

      5.2  Connection setting  5.2.1  Connect the router to a modem for internet access    Ensure that no SIM card is inserted and no Ethernet cable with internet access is connected to the  WAN port.  Use a wireless device to set up the router  Connect the router.  Step 1 Use the included power adapter to connect the router to a power source.  Connect the wireless device, such as a smart phone, to the wireless network of the router  using the SSID and WiFi key specified on the label of the router.  Connect port 2 to a modem using an Ethernet cable.    Set up the router.  Step 2 Start a web browser on the phone that has connected to the WiFi network of the router,  and visit 192.168.0.1.  Enter the Account and Password (Both are admin by default).      10   ...
  • Page 18   Choose WAN > Connection Setting, and select WAN Mode.  Click Apply.    Click WAN Settings, and choose a desired WAN Connection Type and enter required  parameters accordingly.  Click Apply in the WAN Settings page.    ‐‐‐End  The configuration succeeds when Complete is displayed in the pop‐up window, and you can access  the internet through the modem.  Parameter  Description  The router provides three connection types: STATIC, DHCP and PPPoE. Choose one  according to your need.   STATIC: Use the fixed IP address and related parameters provided by your ISP to  access the internet.  WAN Connection Type   DHCP: Use dynamic IP address provided by your ISP to access the internet.   PPPoE: Use the account and password provided by your ISP to access the  internet.  IP Address  Subnet Mask  Under STATIC mode, you need to enter these fixed IP Address information provided  Default Gateway  by your ISP.  Primary DNS  Secondary DNS  Host Name  It specifies the name of the router recognized by your ISP.  11   ...
  • Page 19   Parameter  Description  User Name  Password  Under PPPoE mode, you need to enter the User Name, Password and Verify  Password provided by your ISP.  Verify Password  Operation Mode  Use a computer to set up your router  Connect devices.  Step 1 Use the included power adapter to connect the router to a power source.  Connect port 1 of the router to a computer using an Ethernet cable.  Connect port 2 to a modem using an Ethernet cable.    Set up the router.  Step 2 Start a web browser on the computer that has been connected to the router, and visit  192.168.0.1.  Enter the Account and Password (the default values are both admin).    Choose WAN > Connection Setting, and click WAN Mode.      12   ...
  • Page 20   Click Apply.    Click WAN Settings. Choose a desired WAN Connection Type and enter required  parameters accordingly.  Click Apply.    ‐‐‐End  The configuration succeeds when Complete is displayed in the pop‐up window.    You can access the internet with a computer connected to the port 1, or wireless devices  connected to the router’s wireless network.  The network typology of accessing the internet through a modem is shown below:    13   ...
  • Page 21: Insert A Sim Card Into The Router For Internet Access

      5.2.2  Insert a SIM card into the router for internet access  If you are setting up the router in factory settings, please refer to the Quick setup part to access  the internet with a SIM card. Otherwise, you can follow the steps below to switch to LAN mode  and access the internet with a SIM card.  Procedures for switching to LAN mode:  Start a web browser on the device connected to the router, and visit 192.168.0.1.  Step 1 Choose WAN > Connection Setting.  Step 2 Select LAN Mode.  Step 3 Click Apply.  Step 4 Pull out the Ethernet cable connected to the modem.    Step 5 Press the POWER ON/OFF button to power off the router.  Step 6 Insert a SIM card and press down the POWER ON/OFF button.  Step 7 Wait a few seconds. When the INTERNET indicator blinks blue or green, and the Signal  Strength LED indicator lights green (1 to 4 bars), the router is connected to the internet  successfully.  ‐‐‐End  You can access the internet with a computer connected to the port 1, or wireless devices  connected to the router’s wireless network.  The network typology of accessing the internet using a SIM card is shown below:      When the INTERNET indicator lights solid red:   Check if the SIM card is inserted correctly or locked. To unlock the SIM card, please see Unlock and  lock a SIM card.   If you have obtained APN parameters from your ISP, you can refer to APN setting to manually  create an APN profile and connect to the internet.      14 ...
  • Page 22: Apn Setting

      5.3  APN setting  When a SIM card is inserted, the router can automatically detect the profile information. When  you have obtained APN parameters or in need of joining a specific network, you can manually add  a new APN profile and connect to it.    Parameter  Description  Profile ID  It specifies the ID of the new profile created.  Name  It specifies the name of the operator or network provider.  APN  It specifies the connection type of the router to the network.  User  It specifies the user name and password used for joining the network.  Password  It specifies the types of communication protocol. Available options are IPV4, IPV6 and  PDP Type  IPV4/IPV6. IPV4/IPV6 is recommended.  Authentification  It specifies the authentication protocols for network connection. Available options are  Preference  PAP, CHAP and PAP/CHAP. PAP/CHAP is recommended.    Procedures for adding a new APN profile:  Start a web browser on the device connected to the router, and visit 192.168.0.1.  Step 1 Choose WAN > APN Setting.  Step 2 Choose Profile List, click the dropdown box, and choose Add New.  Step 3 Fill the required parameters, and click Set Connect.  Step 4 Click Apply.  Step 5 ‐‐‐End      15 ...
  • Page 23: 3G/2G Modem

      5.4  4G/3G/2G modem  When a 4G SIM card is inserted into the router, you can set the router to the desired network type.  The default network type is Auto.  Procedures for setting the network type:  Start a web browser on the device connected to the router, and visit 192.168.0.1.  Step 1 Choose WAN > 4G/3G/2G Modem.  Step 2 Click the dropdown box, and choose among Auto, LTE Only, WCDMA Only and GSM Only.  Step 3 Click Change.  Step 4   ‐‐‐End  Parameter  Description  The router switches among three network types of LTE, WCDMA and GSM according to  Auto  real‐time internet situation.  LTE Only  Only use LTE network, which is a kind of 4G cellular network.  WCDMA Only  Only use WCDMA network, which is a kind of 3G cellular network.  GSM Only  Only use GSM network, which is a kind of 2G cellular network.      16   ...
  • Page 24: Pin

      5.5  PIN  5.5.1  Unlock and lock a SIM card  PIN code is the identification password for a SIM card, preventing it from embezzlement. If your  SIM card is locked with a PIN code, you have to unlock the SIM card before accessing the internet.  Procedures for unlocking the locked SIM card:  Insert a SIM card, and log into the web UI. A pop‐up window appears. Click PIN.  Step 1   Enter the PIN code of the SIM card, click Unlock PIN.  Step 2   ‐‐‐End  Wait for the processing of the router until Completed is shown in the page.  If you want to lock the SIM card, choose PIN > SIM Lock/Unlock Configuration and click Disable.    5.5.2  Change the PIN code  When the SIM card is unlocked, you can change the PIN code for it.  Procedures for changing the PIN code:  Start a web browser on the device connected to the router, and visit 192.168.0.1.  Step 1 Choose WAN > PIN.  Step 2 Choose Change PIN code, and enter PIN code and customize a New PIN code.  Step 3     17   ...
  • Page 25   Click Apply.    Step 4   ‐‐‐End      18   ...
  • Page 26: Plmn

      5.6  PLMN  PLMN is Public Land Mobile Network, a combination of wireless communication services offered  by a specific ISP in a specific country. The router provides two modes: Automatic and Manual.  Under Automatic mode, the router will automatically select the most appropriate network  registration connection. The default mode for PLMN is Automatic.  Under Manual mode, you can query and update your network.  Procedures for changing PLMN:  Start a web browser on the device connected to the router, and visit 192.168.0.1.  Step 1 Choose WAN > PLMN.  Step 2 Click the dropdown box, choose Manual.  Step 3 Click Query, and wait until the router finishes processing.  Step 4 Choose a network registration, click Update.  Step 5   ‐‐‐End      19   ...
  • Page 27: Data Limit Setting

      5.7  Data limit setting  You can control the data usage of the SIM card inserted and set a limit for data usage to avoid  unexpected overuse of data traffic.  5.7.1  Data usage/statistics  You can configure data limit settings in this page.  Procedures for setting data limit:  Start a web browser on the device connected to the router, and visit 192.168.0.1.  Step 1 Choose WAN > Data Limit Setting.  Step 2 Select Enable Data Limit.  Step 3 Enter your desired value and click Apply.    Step 4   ‐‐‐End  If you want to reset or delete your data limit settings, you can click Reset.  5.7.2  Reset statistics  You can reset data usage statistics according to your need.  Procedures for resetting data usage statistics:  Start a web browser on the device connected to the router, and visit 192.168.0.1.  Step 1 Choose WAN > Data Limit Setting.  Step 2 Choose Reset Statistics, and click the Reset button to complete the operation.  Step 3   ‐‐‐End  20   ...
  • Page 28: Lan

      6  LAN  6.1  LAN  In this page, you can check and change the LAN IP information of your router, including IP Address  and IP Subnet Mask.    Parameter  Description  It specifies the LAN IP address of the router. The default value is 192.168.0.1.  IP address    You can change it as required. IP Subnet Mask  It specifies the subnet mask of the LAN IP address. The default value is  255.255.255.0.      Procedures for changing the default value:  Start a web browser on the device connected to the router, and visit 192.168.0.1.  Step 1 Choose LAN > LAN.  Step 2 Specify the LAN IP Address and its IP Subnet Mask.  Step 3 Click Apply to complete.  Step 4 ‐‐‐End      21   ...
  • Page 29: Dhcp

      6.2  DHCP  6.2.1  DHCP server  The DHCP server function of the router can automatically assign IP addresses within a fixed range  to clients connected to the router. To configure this function, choose DHCP > DHCP Server.    Procedures for enabling DHCP sever:  Start a web browser on the device connected to the router, and visit 192.168.0.1.  Step 1 Choose LAN > DHCP.  Step 2 Set DHCP Mode to Sever.  Step 3 Specify the Start IP address of the IP address pool, which defines the range of the IP  Step 4 addresses that can be assigned by the DHCP server to clients.  Specify the End IP address of the IP address pool.  Step 5 Specify the Lease Time. The default value 720 minutes is recommended.  Step 6 Click Apply.  Step 7 ‐‐‐End    Parameter  Description  It specifies whether to enable the DHCP server function. To enable it, set DHCP Mode  to Sever. To disable it, set DHCP Mode to None.   Server: The DHCP server is enabled.  DHCP Server   None: The DHCP server is disabled. You need to manually configure IP addresses  and other relevant information to the clients connected to the router for internet  access.  It specifies the first IP address that can be assigned by the DHCP server to a client. The  Start IP  default value is 192.168.0.20.  It specifies the last IP address that can be assigned by the DHCP server to a client. The ...
  • Page 30: Leased Hosts

      Parameter  Description  It specifies the validity period of an IP address assigned by the DHCP server to a client.  Lease Time  The default value is 720 minutes.  6.2.2  Leased hosts  To view information about the clients that obtain IP addresses from the DHCP server of the router,  choose LAN > DHCP > Leased Host.    You can click Refresh to view the latest client information.  23   ...
  • Page 31: Sms

      7  SMS  With a SIM card inserted, you can use the SMS functions of the router under LAN mode.  7.1  New message  You can send SMS messages to other mobile phone users.    Procedures for sending new messages:  Start a web browser on the device connected to the router, and visit 192.168.0.1.  Step 1 Choose SMS > New Message.  Step 2 Enter a mobile phone number in Send To and the message content in Message.  Step 3 Click Send to send the message, or click Save to save the message into Draftbox.  Step 4 ‐‐‐End    Please enter a valid phone number and message content within the limited length.      24   ...
  • Page 32: Ussd

      7.2  USSD  With USSD function, you can get specific information or perform specific operations by send a  special code or command to your ISP.    Such codes or commands are predetermined. You can contact your ISP to find those codes or  commands.    Procedures for sending a USSD command:  Start a web browser on the device connected to the router, and visit 192.168.0.1.  Step 1 Choose SMS > USSD.  Step 2 Enter a USSD CMD, click Send.  Step 3 Read the result in USSD Read, or perform further operations.  Step 4 ‐‐‐End      25   ...
  • Page 33: Inbox

      7.3  Inbox  To view the received SMS messages, choose SMS > Inbox.      Received SMS messages can be stored in two locations: Local and SIM Card.  You can also change the storage location by following steps in Set SMS storage location.      26   ...
  • Page 34: Outbox

      7.4  Outbox  To view the SMS messages that you have sent, choose SMS > Outbox.      SMS messages that have been sent can be stored in two locations: Local and SIM Card.  You can also change the storage location by following steps in Set SMS storage location.      27   ...
  • Page 35: Draftbox

      7.5  Draftbox  To view, edit and send unsent SMS messages, choose SMS > Draftbox.      Unsent SMS messages can be stored in two locations: Local and SIM Card.  You can also change the storage location by following steps in Set SMS storage location.      28   ...
  • Page 36: Settings Sms

      7.6  Settings SMS  7.6.1  Set SMSC  SMSC is Short Message Service Center, the short message server for SMS messages. You will be  unable to send SMS messages with a wrong SMSC Address.  The router can automatically detect the SMSC after you insert a SIM card. If SMSC is changed  mistakenly and SMS messages cannot be sent, you can correct it in Settings SMS > Set SMSC.      Contact your ISP for correct SMSC address.  7.6.2  Set SMS storage location  You can choose to store SMS messages in Local or SIM Card. To change the setting, choose Settings  SMS > Set SMS storage location.    7.6.3  Set SMS receipt  You can choose whether or not to receive SMS receipt as a feedback of successfully delivery of  SMS messages. To enable SMS receipt, choose Settings SMS > Set SMS receipt.      29   ...
  • Page 37: Wifi

      8  WiFi  8.1  Specify basic settings of your wireless network  This part enables you to configure the basic settings of the wireless network. To access this page,  choose WiFi > Basic.    Parameter  Description  It specifies the network mode used by the wireless network. The default is  recommended.   802. 11 B Only: Under this mode, only IEEE 802.11b wireless devices are allowed to  connect to the wireless network of the device.   802. 11 B/G mixed: Under this mode, only IEEE 802.11b and 802.11g wireless  devices are allowed to connect to the wireless network of the device.  Mode   802. 11 B/G/N mixed: Under this mode, IEEE 802.11n wireless devices operating at  2.4 GHz and IEEE 802.11b and 802.11g wireless devices are allowed to connect to  the wireless network of the device.   802. 11 G Only: Under this mode, only IEEE 802.11g wireless devices are allowed to  connect to the wireless network of the device.   802. 11 N Only: Under this mode, only IEEE 802.11n wireless devices operating at  2.4 GHz are allowed to connect to the wireless network of the device.  It specifies the wireless channel the router works in. The default value is “Auto”, which  Channel  means the router can check the availability of each channel, and choose the best one.  You can also use other tools to find and switch to a less‐used channel with less  30   ...
  • Page 38   Parameter  Description  interference in order to enhance wireless performance. It specifies the frequency width of the channel of the router. The default is  Channel Width  recommended.  SSID  It specifies the name of the wireless network of the router.  Encryption Type involves how your communication is secured and affects your  network security. The router supports None, WEP and WAP Personal.   None: It indicates that the wireless network is not encrypted.   WEP: Wired Equivalent Privacy (WEP) uses a static key to encrypt all data  Encryption Mode  exchanges, and ensures that a wireless LAN has the same level of security as a wired  LAN. Under this mode, you need to set the Authentication Mode and the WEP  Default Key.   WAP Personal: It indicates another encryption mode for data exchange. Under this  mode, you need to set WAP Mode, Cipher Type and Pre‐shared key.  The available authentication modes include Open System and Shared Key.   Open System: It specifies that authentication is not required if the Encryption Type  is WEP. In this case, a wireless client can connect to the router without being  authenticated, and the data exchanged between them is encrypted in WEP security  Authentication  mode.  Method   Shared Key: It specifies that authentication is not required if the Encryption Type is  WEP. In this case, a wireless client can connect to the router without being  authenticated, and the data exchanged between them is encrypted in WEP security  mode.  WEP Encryption  It specifies the length of the key that you set for the wireless network.  Length  It specifies the default WEP key for the Open System and Shared Key encryption types. For example, if the default key is set to WEP key 2, a wireless client can connect to the  router only with WEP key 2. ...
  • Page 39: Enable/Disable The Wireless Network

      Parameter  Description  used, the router can reach a maximum wireless transmission rate of 300 Mbps.  TKIP: It is short for Temporal Key Integrity Protocol. If this encryption algorithm is  used, the router can reach a maximum wireless transmission rate of 54 Mbps.   TKIP and AES: It indicates that both TKIP and AES encryption algorithms are  supported. Wireless clients can connect to the router based on TKIP or AES.  Pre‐shared Key  It specifies the connection password for wireless devices.  8.1.1  Enable/Disable the wireless network  Procedures for enabling or disabling wireless network:  Start a web browser on the device connected to the router, and visit 192.168.0.1.  Step 1 Choose WiFi > Basic.  Step 2 Tick the Enable box to enable the wireless network, and untick it to disable the wireless  Step 3 network.  Click Apply.  Step 4   ‐‐‐End      32   ...
  • Page 40: Hide Ssid

      8.1.2  Hide SSID  In order to prevent you wireless network from being searched by others, you can hide the SSID.  Procedures for hiding SSID:  Start a web browser on the device connected to the router, and visit 192.168.0.1.  Step 1 Choose WiFi > Basic.  Step 2 Tick Hide SSID.  Step 3 Click Apply.  Step 4   ‐‐‐End  8.1.3  Change your WiFi name and password  You can change the WiFi name and password of the wireless network.  Procedures for changing the SSID and password:  Start a web browser on the device connected to the router, and visit 192.168.0.1.  Step 1 Choose WiFi > Basic.  Step 2 Choose SSID, enter your desired SSID.  Step 3 Set your password according to the encryption type you choose.  Step 4 Click Apply.  Step 5   ‐‐‐End      33   ...
  • Page 41: Use Wps To Connect To The Wireless Network

      8.2  Use WPS to connect to the wireless network  You can connect wireless devices (e.g. smart phones) to the wireless network of the router easily  and quickly with WPS.    Wireless devices (e.g. smart phone) are also required to support WPS function if you hope to connect  to the WiFi in this way.  Method 1: Use the WPS button  Procedures for using WPS button for WPS connection:  Press the WPS button on the bottom panel of the router and release it. The WIFI indicator  Step 1 blinks green.  Enable WPS function on your wireless device within 2 minutes to perform WPS  Step 2   negotiation and connect to the wireless network.  ‐‐‐End  Method 2: Use PBC  Procedures for using PBC for WPS connection:  Start a web browser on the device connected to the router, and visit 192.168.0.1.  Step 1 Choose WiFi > WPS.  Step 2 Tick Enable.  Step 3 Set Configure Method to PBC.  Step 4 Click Apply.  Step 5   Enable the WPS function on your wireless device ithin 2 minutes to perform WPS  Step 6  w negotiation and connect to the wireless network.  ‐‐‐End  When the pop‐up window with WPS connect success appears, the wireless device is connected to  the wireless network.  34 ...
  • Page 42   Method 3: Use PIN code    Normally, mobile phones do not support connection with WPS PIN code. Such method is commonly  used for wireless network card to connect to WiFi. For more information, please refer to the user guide  of the wireless network card.  Procedures for using PIN code for WPS connection:  Start a web browser on the device connected to the router, and visit 192.168.0.1.  Step 1 Choose WiFi > WPS.  Step 2 Tick Enable.  Step 3 Set Configure Method to PIN.  Step 4 Enter the PIN code of your wireless device in the Enrollee PIN box.  Step 5 Click Apply.  Step 6   ‐‐‐End      35   ...
  • Page 43: Allow/Block Access To Your Wireless Network

      8.3  Allow/block access to your wireless network  MAC Filter enables you to allow/block the devices to access your wireless network. Blocked    devices are unable to connect to the wireless network. Available modes include Disable, Allow  listed stations and Deny listed stations.    Parameter  Description   Disable: Under this mode, all clients can connect to the router after entering the  password. The default setting for MAC Filter is Disable.   MAC Address Filter  Allow listed stations: Under this mode, only devices added are allowed to connect  Mode  to the wireless network.   Deny listed stations: Under this mode, devices are all allowed to connect to the  wireless network except for those added ones.  Active  Tick or untick the Active checkbox to enable or disable the MAC filter rule.  Name  It is used to specify a name for the rule.  MAC Address  It is used to specify the MAC address of a wireless device to which the rule applies.  Delete  It is used to delete the rule for the device.  8.3.1  Add devices allowed to access your wireless network  If you only want to allow certain devices to access your wireless network, for example devices of  your family members, you can add their devices to the MAC Filter list by creating Allow listed  stations rules.  Procedures for adding allowed devices:  Start a web browser on the device connected to the router, and visit 192.168.0.1.  Step 1 Choose WiFi > MAC Filter.  Step 2 Select Allow listed stations, click Add. ...
  • Page 44: Set Devices Denied To Access Your Wireless Network

      Click OK and then click Apply.  Step 5   ‐‐‐End  If you want to modify the present rules, click the corresponding parameter and modify it. Click OK  and Apply to enable it.     Under this mode, any unauthorized devices may be notified “Wrong password” when trying to  connect the network.   To deny the connection of present allowed devices, click Delete or Delete All, and click Apply.  8.3.2  Set devices denied to access your wireless network  If you want to block certain devices from access your wireless network, you can add these devices  to Deny listed stations.  Procedures for adding denied devices:  Start a web browser on the device connected to the router, and visit 192.168.0.1.  Step 1 Choose WiFi > MAC Filter.  Step 2 Select Deny listed stations, click Add.  Step 3 Select Active, specify a name and enter the MAC address of the device.  Step 4 Click OK and then click Apply.  Step 5   ‐‐‐End  If you want to modify the present rules, click the corresponding parameter and modify it. Click OK  and Apply to enable it.  37   ...
  • Page 45      Under this mode, any added devices may be notified “Wrong password” when trying to connect to  the network.   To allow the access of present denied devices, click Delete or Delete All, and click Apply.      38   ...
  • Page 46: View Station List

      8.4  View station list  In the Station List column, the MAC addresses of all connected devices through wireless network  are listed. To view the MAC addresses of connected devices, choose WiFi > Station Lists.    39   ...
  • Page 47: Security

      9  Security  9.1  Firewall  Firewall is used to protect the LAN of the router. You can configure the firewall as required.  9.1.1  Configure basic settings  The router enables firewall by default. You can enable or disable the firewall and configure firewall  entry rules.    Parameter  Description  Firewall Enable  Enable or disable the firewall of the router.   Packets Allowed  Drop: Communications between certain source IP and destination IP address  that are specified in the rules added in the IPv4 Firewall Entries and IPv6  Firewall Entries are blocked.   Accept: Only communications between certain source IP address and  destination IP address that are specified in rules added in the IPv4 Firewall  Entries and IPv6 Firewall Entries are allowed.  9.1.2  Add firewall entry rules  IPv4 Firewall Entries and IPv6 Firewall Entries enable you to add rules to allow data exchange  through the firewall between the source IP address and the destination IP address.    40   ...
  • Page 48   Parameter  Description  Source IP  It  specifies  the  two  IP  addresses  whose  communications  are  to  be  allowed  or  blocked by adding firewall entry rules.  Destination IP  Source from Port  It  specifies  the  port  or  a  range  of  port  used  by  the  source  IP  to  access  the  destination IP. If you are not sure, keep the default value.  Source to Port  Destination from Port  It specifies the port or a range of port used by the destination IP to be accessed ...
  • Page 49: Nat

      9.2  NAT  9.2.1  Configure NAT settings  You can set NAT configurations, such as NAT Type, IPSEC/PPTP/L2TP VPN Pass Through and  Webserver WWAN Access. To change these configurations, choose NAT > Configure.    Parameter  Description  It specifies the NAT forwarding type of the router. Available options include  NAT Type  Symmetric, Port Restricted, Full Core and Address Restricted. Different types are  featured with varied security and convenience level.  IPSEC VPN Pass Through  These options enable you to allow or prohibit data pass‐through of certain types  PPTP VPN Pass Through  of VPN servers within the LAN of the router.  L2TP VPN Pass Through  Webserver WWAN  These options enable you to allow or prohibit the access of WWAN request to the  Access  LAN of the router.  9.2.2  Enable access to virtual servers  If you have a virtual server under the LAN of the router, you can configure the router to allow the  access of users from the internet to the virtual server.    42   ...
  • Page 50   Parameter  Description  IP  It specifies the IP address of a server under the LAN of the router.  Private Port  It specifies the service port number of a server under the LAN of the router.  Global Port  It specifies a router port accessible to internet users.  It specifies the protocol of a service provided through the router for internet  Protocol  users. The available protocols include ICMP, TCP and UDP.  Application Scenario  A 4G680 is used to set up a LAN and a web server on the LAN must be accessible to internet users.  This requirement can be addressed using the virtual server function. The following figure shows  the application scenario.  WAN IP address of the router:  102.33.66.88  IP address of the web server:    192.168.0.150  Network requirement   The WAN port of the router is assigned a public IP address.   Computer 1 is assigned a static IP address. The default gateway IP address is the  192.168.0.150.   All the firewall and antivirus software that may deny internet users' access to the LAN server is  disabled when virtual server function is used.  Configuration    Procedures for configuring the virtual server function:  Start a web browser on the device connected to the router, and visit 192.168.0.1.  Step 1 Choose Security > NAT.  Step 2 43   ...
  • Page 51   Click Add.  Step 3 Enter the IP address of the virtual server, which is 192.168.0.150 in this example.  Step 4 Define a Private Port and Global Port, which are both 9999 in this example.  Step 5 Select a Protocol, and click Apply.  Step 6     If you want to modify the present rule, click the corresponding parameter and modify it. Click OK and  Apply to enable it.  ‐‐‐End  After the settings, users from the internet can access the virtual server by visit the address in a  web browser “Intranet service layer protocol name://the present WAN IP address of the  router:global port”.  For example, when the WAN IP address of the router is 102.33.66.88, set the private port to 9999  and Global port to 9999, you can visit “http:// 102.33.66.88:9999” to access the visual server.      44   ...
  • Page 52: Dmz

      9.3  DMZ  9.3.1  Overview  You can set a certain computer as a DMZ Host to free the computer from any restriction in the  process of accessing the internet. Therefore, the DMZ Host can obtain better internet experience.  For example, a video meeting and online games can be smoother on a DMZ host.     When a computer is set as a DMZ host, it is completely exposed to the internet, which means that  the computer will not be protected by the firewall of the router.   A DMZ host can be easily used by hackers to attack the local network. Do not set DMZ host  randomly.   Security software, anti‐virus software and system firewall may affect the DMZ function. Please  disable these safety measures during the use of DMZ function.    Parameter  Description  DMZ Host  It specifies the IP address of the device that is set as a DMZ host.  9.3.2  Access the LAN with an IP address from the internet  Network requirement  Assume that you have a FTP server under the LAN of the router, and you want to share the  resources on the server to allow family members to access those resources from the internet.  Solution  You can meet the requirement with the DMZ host function.  Assume that:   The IP address of the FTP server: 192.168.0.101.   The MAC address of the host of the FTP server: D4:61:DA:1B:CD:89.   The service port of the FTP server: 21.  45   ...
  • Page 53     Please ensure that router obtains an IP address from the public network. This function may not work  on a host with an IP address of a private network. Common IPv4 addresses are classified into class A,  class B and class C. Private IP addresses of class A range from 10.0.0.0 to 10.255.255.255; Private IP  addresses of class B range from 172.16.0.0‐172.31.255.255; Private IP addresses of class C range from  192.168.0.0‐192.168.255.255.  Access with an IP address  WAN IP: 102.33.66.88  Server  IP address:192.168.0.101    Procedures for setting a DMZ host:  Start a web browser on the device connected to the router, and visit 192.168.0.1.  Step 1 Choose Security > DMZ.  Step 2 Enter 192.168.0.101 in DMZ Host.  Step 3 Click Apply.  Step 4 ‐‐‐End  Follow the steps above for setting a DMZ host, you can access the intranet server by visiting  “Intranet service layer protocol name://the present WAN IP address of the router”, which is  “ftp://102.33.66.88” in this example. If the intranet service port is not the default port, you can  access the intranet server by visiting “Internal service layer protocol name://the present WAN IP  address of the router:internal service port”.     When the default intranet service port is 80, please change it to an uncommon port (1024‐65535)  manually, such as 9999.   If internet users still cannot access the server after the configuration, please try to disable the  system firewall, anti‐virus software on the DMZ host and try again.    46   ...
  • Page 54: System

      10  System  10.1  View the basic information of the router  To view the basic information of the router, you can choose System > About. Information listed  includes Device Name, FW Version, IMEI and Hardware Version.    Parameter  Description  Device Name  It specifies the product name of the router.  FW Version  It specifies the current firmware version of the router.  It specifies the fixed serial number of each mobile telecommunication device. Because  IMEI  the router can be inserted with a SIM card, it therefore is assigned an IMEI number.  Hardware Version  It specifies the current hardware version of the router.      47   ...
  • Page 55: Configure The Qos Function

      10.2  Configure the QoS function  The QoS function allows you to prioritize traffic of certain clients, so that more important traffic  can pass through first.    Parameter  Description  Upstream bandwidth  It specifies the bandwidth assigned to the local hosts specified in the rules.  Local IP  It specifies the IP address of the local host that is to be assigned priority.  Ports  It specifies the port used by the local host to access the remote IP.  Remote IP  It specifies the IP address to be accessed with priority.  Ports  It specifies the port used by the remote IP to be accessed.  Enable  It is used to enable or disable the corresponding rules.    Procedures for adding new QoS rules:  Start a web browser on the device connected to the router, and visit 192.168.0.1.  Step 1 Choose System > QoS.  Step 2 Select Enable QoS Packet Filter.  Step 3 Enter the bandwidth limit for Upstream bandwidth.  Step 4 Click Add, enter the Local IP and Ports of a certain prioritized client under the LAN of the  Step 5 router, and enter the Remote IP and Ports, and select Enable.  Click OK and Apply.  Step 6 ‐‐‐End  After the setting, the data exchange between the specified local IP address and remote IP address  will be forwarded in priority.    48   ...
  • Page 56: Configure The Tr069 Function

      10.3  Configure the TR069 function  The router allows Automatic Configuration Server (ACS) to manage itself with TR069 protocol. The  TR069 function can conduct automatic configuration, software and hardware management, device  monitoring and malfunction diagnose. To configure TR069, choose System > TR069.    Parameter  Description  RM Type  It specifies the protocol used for the setting.  ACS URL  It specifies the domain name of the ACS.  ACS User Name  It specifies the user name and password of the router that are required for  authentication when the router is connecting to the ACS through TR069 protocol.  ACS User Password  When the periodical inform is enabled, the router will send its information to the  Periodic Inform  ACS periodically.  Periodic Inform Interval  It specifies the interval at which the router sends its information to the ACS.  Request User Name  It specifies the user name and password required for ACS authentication when the  ACS is sending a connection request to the router.  Request User Password  Procedures for configuring the TR069 function:  Start a web browser on the device connected to the router, and visit 192.168.0.1.  Step 1 Choose System > TR069.  Step 2 Fill in ACS URL, ACS User Name and ACS User Password.  Step 3 Choose to Enable or Disable for Periodic Inform. If you choose Enable, enter the Periodic  Step 4 Inform Interval.  Fill in the Request User Name and Request User Password.  Step 5 Click Apply.  Step 6 ‐‐‐End ...
  • Page 57: Restore The Factory Settings

      10.4  Restore the factory settings  If you cannot locate the cause for a failure to access the internet or forget your login user name or  password for the router, you can restore the router to factory settings to solve the problem. To  reset to default, choose System > Configuration and click Reset.    You can also use the reset button on the AP to restore the factory settings.      50   ...
  • Page 58: Upgrade Your Firmware

      10.5  Upgrade your firmware    For more functions and higher stability, you can download an updated version of firmware for the  router from www.tendacn.com to upgrade the firmware of the router. To upgrade the firmware,  choose System > Firmware Upgrade.      Do not power off the router during an upgrade. Otherwise, the router may be damaged.  Procedures for upgrading your firmware:  Download the package of an updated firmware version for the router from  Step 1 www.tendacn.com to your local computer.  Decompress the firmware file that you have downloaded.  Step 2 Start a web browser on the device connected to the router, and visit 192.168.0.1 and  Step 3 choose System > Firmware Upgrade.  Click Browse or Choose file and choose the router upgrade file.  Step 4 Click Update.  Step 5 ‐‐‐End  Wait until the upgrade and reboot process is completed. Choose System > Firmware Upgrade and  check whether the upgrade is successful based on About > FW Version.      51   ...
  • Page 59: Change Session Timeout And Login Password

      10.6  Change session timeout and login password  To control the access to the web UI, the page is set with Session Timeout and login Password. To  change the login password, choose System > Password.      Parameter  Description  Session  It specifies the time span that a user can stay at the web UI without any operation.  Timeout(Min)  After the time span, you will be logged out automatically.  New password  When setting a new password for logging in the Web UI, you are required to enter it  Retype new  twice for confirmation.  password  Procedures for changing session timeout and login password:  Log in the web UI with the present password.  Step 1 Choose System > Password.  Step 2 Set new Session Timeout, New Password and Retype Password.    Step 3 Click Apply.  Step 4 ‐‐‐End  After the setting, you will be logged out of the web UI and can use the new password to log in.      52   ...
  • Page 60: Set Date And Time

      10.7  Set date and time  The router provides the system time and daylight saving time (DST) for time management.  10.7.1  Set system time  To view and set system time of the router, you can choose System > Date and Time.  Synchronizing the system time with internet time servers  If you want to change the system time to match certain time zone, perform the following steps.  Procedures for setting the system time:  Start a web browser on the device connected to the router, and visit 192.168.0.1.  Step 1 Choose System > Date and Time.  Step 2 Choose a Time Zone in the dropdown box.  Step 3 Click Apply.  Step 4   ‐‐‐End    When you choose to synchronize the system time with internet time servers, the router will  automatically conduct synchronization when it is connected to the internet each time. Time Sever  Address can also be changed. The default servers are 1.my.pool.ntp.org, 2.my.pool.ntp.org and  3.my.pool.ntp.org.  Manually sync with the host  If you want to sync the system time with the internet in real time, you can conduct it manually.  Procedures for syncing the system time manually:  Start a web browser on the device connected to the router, and visit 192.168.0.1.  Step 1 Choose System > Date and Time.  Step 2 53   ...
  • Page 61: Enable Daylight Saving Time

      Click Sync with host.  Step 3 Click Apply.  Step 4 ‐‐‐End  10.7.2  Enable daylight saving time  The router provides Daylight Saving Time (DST) setting. To enable, disable and set DST, choose  System > Date and Time.  Procedures for enabling DST:  Start a web browser on the device connected to the router, and visit 192.168.0.1.  Step 1 Choose System > Date and Time.  Step 2 Select Enable Daylight Saving.  Step 3 Set the Start Date and End Date for DST.  Step 4 Click Apply.  Step 5   ‐‐‐End  To disable DST, you can deselect Enable Daylight Saving, and click Apply.      54   ...
  • Page 62: Reboot

      10.8  Reboot  To reboot the router on the web UI, choose System > Reboot.    When the router reboots, all wireless connections are released. You are recommended to reboot the  router at an idle hour.  Procedures for rebooting the router:  Start a web browser on the device connected to the router, and visit 192.168.0.1.  Step 1 Choose System > Reboot.  Step 2 When a pop‐up window appears, click OK. Step 3   The router will begin rebooting, please wait until the reboot finishes. Step 4   ‐‐‐End      55   ...
  • Page 63   Appendix  Setting the IP address of your computer  This part describes how to set the IP address settings to Obtain an IP address automatically and  Obtain DNS server address automatically. Choose the corresponding setting guidance according  to the operation system of your computer and follow the configuration procedures.  Windows 10  Right‐click the start menu    at the lower left corner of your desktop, choose Network  Step 1 Connection.    Right‐click Ethernet, choose Properties in the displayed menu.  Step 2   56   ...
  • Page 64   Double‐click Internet Protocol Version 4 (TCP/IPv4).  Step 3     Choose Obtain an IP address automatically and Obtain DNS server address  Step 4 automatically.    The Internet Protocol Version 4 (TCP/IPv4) Properties window will close automatically.  Step 5 Click OK in the Ethernet Properties window.  ‐‐‐End      57   ...
  • Page 65   Windows 7  Click Start > Control Panel.  Step 1   Click Network and Internet.  Step 2   Click Network and Sharing Center.  Step 3   58   ...
  • Page 66   Click Change adapter settings.  Step 4   Right‐click Local Area Connection, choose Properties.  Step 5   Double‐click Internet Protocol Version 4 (TCP/IPv4).  Step 6   59   ...
  • Page 67   Choose Obtain an IP address automatically and Obtain DNS server address automatically,  Step 7 click OK.    The Internet Protocol Version 4 (TCP/IPv4) Properties window will close automatically.  Step 8 Click OK in the Ethernet Properties window.  ‐‐‐End  60   ...

Table of Contents

Save PDF