Qos Queue - Tenda V1200 User Manual

Class-Selector PHB: It specifies that the DSCP mark is XXX000 where X can be 0 or 1. The
−
class of service of Class-Selector PHB is the same as that of IP Precedence used in the
current internet. When the XXX are all 0, it is the default PHB.
Assured Forwarding PHB: RFC2597. It is applicable to video service, VPN service, and so on.
−
AF PHB has four service classes which require the corresponding bandwidths and caches.
Each service class has three packet-loss priorities.
Packet-loss Priority AF1
Low (1) 001010
Medium (2) 001100
High (3) 001110
If Enable QoS checkbox is not selected, the QoS Queue and QoS Classification are not available.

The default DSCP mark is used to mark all egress packets that do not match any classification rules.

4.10.1

QoS queue

The QoS queue part includes QoS configuration and WLAN queue.
4.10.1.1 QoS configuration
Overview
ATM interface

AF2 AF3
010010 011010
010100 011100
010110 011110
125
AF4
100010
100100
100110