Wireless Access Control - Tenda W303R User Manual

Note:
1. To use the WPS security, the wireless client must be also WPS-capable.
2. Before you press the hardware WPS button on the device for WPS/PBC
connection, making sure the WPS feature has been enabled on the
device.

4.3 Wireless Access Control

The Access Control feature allows you to specify a list of devices to Permit or
Forbid a connection to your wireless network via the devices' MAC addresses.
All other devices not listed as Permitted will be Forbidden and vice versa.
1. Select the wireless network (SSID) you wish to enable Access Control
on.
2. MAC Address Filter: Select Permit or Forbid from the drop-down list.
3. To permit a wireless device to connect to your wireless network, select
Permit (or Allow), enter its MAC address, click Add and then OK. Then
only this device listed as "Permitted" will be able to connect to your
Wireless N300 Home Router
47