Mac Filtering - Tenda V1200 User Manual

----End
Parameter description
Parameter
Filter Name
IP Version
Protocol
Source IP
address[/prefix length]
Source Port (port or
port:port)
Destination IP
address[/prefix length]
Destination Port (port
or port:port)
4.6.3

MAC filtering

4.6.3.1 Overview
The MAC filtering is effective only when you set the WAN service to bridging. There are two policies
of the function:
Description
It specifies the name of a rule.
It allows you to select an IP protocol, IPv4, or IPv6.
It allows you to select a protocol for the filter rule.
It specifies the IP address and its prefix length of the computer from the internet
which is allowed to access the LAN service.
It specifies the source port used by packets. Source port is for TCP/UDP protocol. If
protocol ICMP is selected, this field is not required. Since the source port of the data
packet is changeable, you'd better set the port to 1:65535 or leave it blank.
It specifies the IP address and its prefix length of the LAN server which allows the
internet users to access.
It specifies the port number used by the LAN service which allows the internet users
to access.
112