Tenda V1200 User Manual page 93

Parameter
Primary DNS server
Secondary DNS
server
4.2.1.4 DHCP reservation
Overview
Generally, IP addresses assigned by the modem router to devices are changeable. Some functions
require static device IP addresses, such as DMZ Host and virtual server. In this case you can use the
DHCP reservation function to bind IP addresses with the devices involved in the functions.
Parameter description
Parameter
Static IP Lease List
Add Entries
Remove Entries
To bind an IP address to a specified device
Step 1 Choose Advanced Setup > LAN to enter the configuration page.
Step 2 Click Add Entries.
Step 3 Enter the MAC address of the specified device in the MAC Address box.
Step 4 Enter an IP address included in the DHCP pool of the device. Assume that the IP address of
the device is 192.168.1.1. You can enter 192.168.1.X (X ranges from 2 to 253).
Step 5 Click Apply/Save.
Description
router.
It specifies the primary DNS IP addresses assigned to connected devices.
It specifies the secondary DNS IP addresses assigned to connected devices.
Description
It displays a list of devices with reserved static IP addresses.
Click to add a static IP lease entry. A maximum 32 entries can be added.
Click to remove a static IP lease entry.
83