Ipv6 Autoconfig - Tenda V1200 User Manual

4.2.3

IPv6 autoconfig

This section allows you to set up an IPv6 internet connection through auto configuration, including
the following 2 parts:
Static LAN IPv6 Address
IPv6 LAN Applications: Setting up the DHCPv6 server to assign IPv6 addresses to the computers in
LAN.
Choose Advanced Setup > LAN > IPv6 Autoconfig to enter the configuration page.
4.2.3.1 Static LAN IPv6 Address Configuration
Overview
This part allows you to set up an IPv6 address for the LAN port, which is an aggregate global unicast
address.
Configuration procedure
Step 1 Choose Advanced Setup > LAN > IPv6 Autoconfig to enter the configuration page.
Step 2 Enter an IPv6 address and the prefix length.
Step 3 Click Save/Apply.
----End
Configuration: Setting up an IPv6 global unicast address for the LAN port.
87