Tenda V1200 User Manual page 61

Parameter
Option 61 IAID
Option 61 DUID
Option 77 User ID
Option 125
Option 50 Request IP Address
Option 51 Request Leased
Time
Option 54 Request Server
Address
Obtain an IPv6 address
automatically
Dhcpv6 Address Assignment
(IANA)
Dhcpv6 Prefix Delegation
(IAPD)
Use the following Static IPv6
address
WAN Next-Hop IPv6 Address
Step 8 Select the options as required based on the parameter description form below.
Description
It is used to specify the IAID value of DHCP option 61 client-indentifier.
It is used to specify the DUID value of DHCP option 61.
It is used to specify the User ID of DHCP option 77.
It specifies the vendor-Identifying Vendor option. If you are not instructed by
a professional, the default is recommended.
It is used to specify the request IP address of DHCP option 50.
It is used to specify the request leased of DHCP option 51.
It is used to specify the request server address of DHCP option 54.
If your ISP does not provide you with IP address information, select this option
to obtain the IP address and other parameters from upstream device.
If it is enabled, the device obtains the IPv6 WAN address using the stateful
DHCPv6 type.
If it is enabled, the device gets the IPv6 prefix form the DHCPv6 server, and
delivers it to its LAN ports.
If your ISP provides you with IP address information, select this option to
enter the IP address and other parameters.
It specifies the gateway address by default.
51