Mac Filter - Tenda V1200 User Manual

5.1.3

MAC filter

5.1.3.1 Overview
The MAC-based wireless access control feature can be used to allow or disallow clients to connect to your 2.4 GHz
wireless networks.
Choose Wireless > 2.4G > MAC Filter to enter the configuration page.
Parameter description
Parameter
Select SSID
MAC Restrict Mode
MAC Address
Add
Remove
5.1.3.2 Adding a MAC filter rule
Step 1 Choose Wireless > 2.4G > MAC Filter to enter the configuration page.
Step 2 Select a SSID to apply the rule if you enable multiple SSIDs.
Step 3 Click Add.
Step 4 Enter the MAC address of the device to which the rule applies.
Description
Select a SSID to which the rule is applied.
The rule is only applicable to the devices connected to the modem router wirelessly.
Disabled: Disable this feature.
Allow: To allow only devices with specified MAC addresses (in the list) to connect to
your wireless network.
Deny: To disallow only devices with specified MAC addresses (in the list) to connect to
your wireless network.
The MAC address of a device to which a MAC filter rule is applied.
Used to add a rule.
Used to remove the rule.
179