Tenda V1200 User Manual page 182

Parameter
Enable Wireless
Multicast
Forwarding (WMF)
SSID
BSSID
Wireless Mode
Country
Channel
Bandwidth
Control Sideband
5.1.1.2 Enabling multiple SSIDs
By setting up multiple SSIDs on a wireless modem router, the modem router can be deployed to
multiple wireless networks, and users can connect to different wireless LANs to avoid interference
with each other.
To enable multiple SSIDs:
Step 1 choose Wireless > 2.4G > Basic to enter the configuration page.
Step 2 Select Enable option to enable the corresponding SSID.
Step 3 Customize the wireless network name for the SSID if you want.
Step 4 Hidden: It specifies whether to hide the SSID. If the option is selected, wireless devices
cannot find the SSID.
Step 5 Disable WMM Advertise: WMM (Wi-Fi Multimedia) is a Wi-Fi Alliance interoperability
Description
environment and communications environment.
Select the option to enable WMF of the modem router. Wireless multicast forwarding is
a network data transmission method, which improves the efficiency of data
transmission to effectively save network bandwidth and reduce network load.
Wireless network name of the modem router.
MAC address of the wireless network.
If 802.11b is selected, only 11b wireless devices can connect to the wireless network.

The maximum wireless rate supported in this mode is 11 Mbps.
If 802.11g is selected, only 11g wireless devices can connect to the wireless network.

The maximum of 54 Mbps wireless rate is supported in this mode.
If 802.11n is selected, only 11n wireless devices can connect to the wireless network.

The maximum of 300 Mbps wireless rate is supported in this mode.
If 802.11b/g Mixed is selected, only 11b or 11g wireless devices can connect to the

wireless network. The maximum of 54 Mbps wireless rate is supported in this mode.
If 802.11b/g/n Mixed is selected, 11b, 11g or 11n wireless devices can connect to the

wireless network. The maximum of 300 Mbps wireless rate is supported in this mode.
Select your country or region.
Select a channel in which the modem router works. Auto indicates that the modem
router automatically changes to a channel rarely used in the ambient environment to
prevent interference.
Select a frequency band of the channel of the modem router.
It specifies the channel extension direction. When the bandwidth is set to 40MHz, you
can choose upper or lower to define the direction of channel extension.
172