4.5
NAT
4.5.1
Virtual server
4.5.1.1
Overview
If computers are connected to the modem router to form a LAN and access the internet through the
modem router, internet users cannot access the hosts on the LAN. Therefore, the servers, such as
web servers, email servers, and FTP servers, on the LAN are inaccessible to internet users. To enable
internet users to access a LAN server, enable the virtual server function of the modem router, and
map one service port of the virtual server to the IP address of the LAN server. This enables the
modem router to forward the requests arriving at the port from the internet to the LAN server.
Choose Advanced Setup > NAT > Virtual Server to enter the configuration page.
Click Add to configure the function.
Parameter description
Parameter
Use Interface
Description
Select a WAN connection to which the rules apply. When there is only one WAN
connection available, the rules will be automatically applied to it.
100