Tenda V1200 User Manual page 124

Parameter description
Parameter
Protocol Type
Destination MAC Address
Source MAC Address
Frame Direction
4.6.3.3 Changing the policy from FORWARDED to BLOCKED
Step 1 Choose Advanced Setup > Security > MAC Filtering to enter the configuration page.
Step 2 Select Change checkbox.
Step 3 Click Change Policy.
----End
Verification
The policy is change to BLOCKED.
4.6.3.4 Adding a frame blocking rule
Step 1 Choose Advanced Setup > Security > MAC Filtering to enter the configuration page.
Step 2 Change the policy to BLOCKED. Refer to
BLOCKED.
Step 3 Click Add.
Step 4 Protocol Type: Select a protocol type from the drop-down list.
Step 5 Destination MAC Address: Enter the destination MAC address apply the MAC filtering rule
Description
It allows you to select the protocol type from the drop-down list.
It specifies the destination MAC address to which the MAC filter rule applies.
It specifies the source MAC address to which the MAC filter rule applies.
It specifies the direction the frame that you want to restrict.
To change the policy from FORWARDED to
114