A-6 Version Information With Cpu Units; A-6-1 Relationship Between Unit Versions Of Units - Omron Sysmac NX Series User Manual

A-6 Version Information with CPU Units

This section provides version-related information when connecting Units to a CPU Unit. This section
describes the relationships between the unit versions of each Unit and the CPU Unit, and Sysmac Stu-
dio version, and the specification changes for each unit version of each Unit.
A-6-1
Relationship between Unit Versions of Units
The relationship between the unit versions of each Unit and the CPU Unit, and Sysmac Studio version
are shown below.
Interpreting the Version Combination Table
The items that are used in the version combination table are given below.
Refer to the user's manual for the CPU Unit for the models of CPU Unit to which NX Units can be
connected.
Model
Model numbers of NX
Units.
Version Combination Table
• With the combinations of the unit versions/versions shown below, you can use the functions that are
supported by the unit version of the Unit model. Use the unit versions/versions (or the later/higher
unit versions/versions) that correspond to the NX Unit models and the unit versions. You cannot use
the specifications that were added or changed for the relevant NX Unit models and the unit versions
unless you use the corresponding unit versions/versions.
• Depending on the type and model of the Unit to which the NX Unit is connected, some Units do not
have the corresponding versions given in the table. If a Unit does not have the specified version,
support is provided by the oldest available version after the specified version. Refer to the user's
manuals for the specific Units for the relation between models and versions.
• If you use the corresponding unit versions/versions given in the following table or later/higher ver-
sions, refer to the version information in the user's manual for the CPU Unit.
Model
NX-HAD401
NX-HAD402
NX-series Analog I/O Units User's Manual for High-speed Analog Input Units (W592)
NX Unit
Unit version
Unit versions of NX Units.
NX Unit
Unit version
Ver.1.0
Corresponding unit versions/versions
CPU Unit
Unit versions of the CPU
Unit that are compatible
with the NX Units.
Corresponding unit versions/versions
CPU Unit
Ver. 1.18
Appendices
Sysmac Studio
Sysmac Studio versions
that are compatible with
the NX Units and CPU
Unit.
Sysmac Studio
Ver.1.23
A - 51
A