A-4 Digital Filter Design With The Library; A-4-1 System Configuration; A-4-2 Digital Filter Design Examples; System Configuration - Omron Sysmac NX Series User Manual

A-4 Digital Filter Design with the Library

This section shows digital filter design examples that utilize the following libraries in the High-speed
Analog Inspection Library of Sysmac Library.
• DeviceVariableToArray_100 (Join Device Output Data)
• DataRecorder (Data Recorder)
• LogDataToCSV (Write Log Data to CSV File)
These libraries enable you to output the analog input values that have been read by a High-speed An-
alog Input Unit to a CSV file. By converting the output data in the form of a CSV file into a graph, you
can adjust the digital filter parameters of the High-speed Analog Input Unit and check their effects.
This section describes the system configuration, and shows how to design digital filters and their pro-
gramming examples. The system configuration here assumes that the High-speed Analog Input Unit is
connected to a CPU Unit. In the programming example where the Unit is connected to an NX-ECC203
EtherCAT Coupler Unit, only differences from the case where it is connected to the CPU Unit are de-
scribed. Refer to A-4-4 Connection to the Communications Coupler Unit on page A - 34 for details.
A-4-1

System Configuration

The system configuration is given below.
(a) (b) (c)
Output device
Letter
(a) NX-series CPU Unit
(b) Additional I/O Power Supply Unit
(c) High-speed Analog Input Unit
A-4-2

Digital Filter Design Examples

The functions used for designing digital filters and the design procedure are shown below.
NX-series Analog I/O Units User's Manual for High-speed Analog Input Units (W592)
Description
NX102-££££
NX-PF0730
NX-HAD401
Model
---
NX Unit number: 1
•
NX Unit number: 2
•
Channel used: Ch1
Appendices
Description
A - 21
A