Part Names - Omron Sysmac NX Series User Manual

3 Part Names and Functions
3-1

Part Names

This section describes the names and functions of the parts of the High-speed Analog Input Units.
(A)
Letter
(A) Marker attachment loca-
tions
(B) NX bus connector
(C) Unit hookup guides
(D) DIN Track mounting
hooks
(E) Protrusions for removing
the Unit
(F) Indicators
(G) Terminal block
(H) Unit specifications
Refer to Installation in the hardware user's manual for the connected CPU Unit or the user's manual
for the Communications Coupler Unit for details on attaching markers.
Refer to 3-2 Indicators on page 3 - 3 for details on the indicators.
Refer to 3-3 Terminal Blocks on page 3 - 6 for details on the terminal blocks.
3 - 2
(B)
(C)
(H) (C)
Name
The locations where markers are attached. The markers made by OM-
RON are installed for the factory setting. Commercially available mark-
ers can also be installed.
This connector is used to connect each Unit.
These guides are used to connect two Units.
These hooks are used to mount the NX Unit to a DIN Track.
The protrusions to hold when removing the Unit.
The indicators show the current operating status of the Unit.
The terminal block is used to connect external devices.
The specifications of the Unit are given.
NX-series Analog I/O Units User's Manual for High-speed Analog Input Units (W592)
(D)
(E) (C)
(F)
(G)
(E) (C)
Description
(B)