Omron Sysmac NX Series User Manual page 81

Terminals
Classifica-
tion
All terminals
except
ground termi-
nals
Ground termi-
nals
Use the following procedure to secure the wires.
1
Prepare a cable tie.
A cable tie can be used with a width of 4 mm or less and a thickness of 1.5 mm or less. Select
a cable tie correctly for the operating environment.
2
Pass a cable tie through the hole for securing wires on the bottom of the screwless clamping
terminal block.
3
Bundle the wires with a cable tie and secure them to the screwless clamping terminal block.
NX-series Analog I/O Units User's Manual for High-speed Analog Input Units (W592)
Current ca-
Ferrule
pacity
2 A max. No
Greater than
2 A and 4 A
or less
Greater than
4 A
---
1.5 mm or less
4.0 mm or less
Wire type
Twisted wires
Plated Unplated
No No
Not possible
Yes
No No
Hole for securing wires
Cable tie
4 Installation and Wiring
Solid wires
Plated Unplated
No No
Yes Not possible
Not possible
No No
4 - 13
4