2 Specifications and Operating Procedures
1-7. User Program Creation
1-8. Final Check
of Task Period/
Sampling Period
Description of Each Step
The following table describes each step in the operation flow and shows where references are provid-
ed.
Step
1-1
Project Creation
1-2
Unit Registration
2 - 6
A
Is task period setting
necessary again?
No
Sampling
Period Check
Are target values met?
End
Item
Create a project with the Support Software. Operation manual for the Sup-
Register the High-speed Analog Input Unit
offline in the connected CPU Unit or Com-
munications Coupler Unit.
NX-series Analog I/O Units User's Manual for High-speed Analog Input Units (W592)
Yes
Task Period
Setting
Sampling
Period Check
Yes
Is it less than 5 μs?
No
No
Yes
Description
Return to "1-4. Unit
Operation Setting"
and decrease the
number of samplings.
Return to "1-4. Unit
Operation Setting"
and increase or
decrease the number
of samplings.
Reference
port Software that you are using