A-8-2
Slave Terminal
This section describes how to display the Edit Unit Operation Settings Tab Page when you edit Unit
operation settings on the Sysmac Studio for NX Units configured as a Slave Terminal.
You can use the methods described below to display the Edit Unit Operation Settings Tab Page via the
Edit Slave Terminal Configuration Tab Page on the Sysmac Studio.
Refer to the Sysmac Studio Version 1 Operation Manual (Cat. No. W504) for how to display the Edit
Slave Terminal Configuration Tab Page.
Method 1
Double-click the NX Unit to set.
Method 2
Right-click the NX Unit and select Edit Unit Operation Settings from the menu.
NX-series Analog I/O Units User's Manual for High-speed Analog Input Units (W592)
Appendices
A
A - 55