Omron Sysmac NX Series User Manual page 243

Details on Data Sheet
Unit name High-speed Analog Input Unit
External connection Screwless clamping terminal block (16 terminals ×2)
terminals
I/O refreshing method Synchronous I/O refreshing
Indicators TS indicator, IN indicator
Analog Number of 4 points
input points
section
Input meth- Differential input
od
Input range Voltage:
•
•
•
•
•
Current:
•
•
•
Input con-
version
range
•
Absolute Voltage: ±15 V
maximum Input current: ±30 mA
rating
Input Impe- Voltage: 1 MΩ min.
dance Current: 250 Ω
•
Resolution
•
Over 25°C ±0.1% (full scale)
all
0 to ±0.2% (full scale)
ac-
55°C
cu-
racy
Conversion
5 µs per channel
time
NX-series Analog I/O Units User's Manual for High-speed Analog Input Units (W592)
-10 to 10 V
-5 to 5 V
0 to 10 V
0 to 5 V
1 to 5 V
0 to 20 mA
4 to 20 mA
Input range of -10 to 10 V or -5
to 5 V
-1% to 101% (full scale)
Other input ranges
-2% to 102% (full scale)
Input range of -10 to 10 V or -5
to 5 V
1/64000 (full scale)
Other input ranges
1/32000 (full scale)
*1
Model NX-HAD401
Trigger Number of 4 points
input points
section
Internal I/O NPN
common
Rated input 24 VDC (20.4 to 28.8 VDC)
voltage
Input cur- 3.5 mA typical (24 VDC)
rent
ON volt- 15 VDC min./3 mA min. (between
age/ON IOV and each signal)
current
OFF volt- 5 VDC max./1 mA max. (between
age/OFF IOV and each signal)
current
ON/OFF re- 1 μs max./1 μs max.
sponse
time
Input filter No filter, 4 µs, 8 µs (default), 16
time µs, 32 µs, 64 µs, 128 µs, 256 µs
Appendices
A
A - 5