A-10-2 Slave Terminal - Omron Sysmac NX Series User Manual

Appendices

A-10-2 Slave Terminal

This section describes how to display the Support Software User Calibration Window for a High-speed
Analog Input Unit connected to the Communications Coupler Unit.
1
In the Multiview Explorer, double-click the Communications Coupler Unit to which the target
High-speed Analog Input Unit is connected to open the Edit Slave Terminal Configuration Tab
Page.
The following tab page is displayed.
2
Go online, right-click the High-speed Analog Input Unit on the Edit Slave Terminal Configura-
tion Tab Page, and select User Calibration from the menu.
A - 60
NX-series Analog I/O Units User's Manual for High-speed Analog Input Units (W592)