Notes On Ce Marking - MICRO-EPSILON WireSensor Series Instruction Manual

Safety
1.3
For WPS draw-wire displacement sensors with voltage, current, digital or encoder outputs, the
EU Directives 2014/30/EU, 2011/65/EU shall apply. In addition, the Machinery Directive is taken into consider-
ation (2006/42/EC).
These sensors carry the CE mark and satisfy the requirements of the EU Directives cited and the European
harmonized standards (EN) listed therein.
The EU Declaration of Conformity is available to the responsible authorities at:
MICRO-EPSILON MESSTECHNIK
GmbH & Co. KG
Königbacher Straße 15
94496 Ortenburg / Germany
Draw-wire displacement sensors with potentiometer output are devices (components) which cannot be oper-
ated autonomously and do not carry a CE mark. For WPS draw-wire displacement sensors with potentiome-
ter output, the directives 2006/42/EC and 2011/65/EU shall apply. Therefore, an EU Declaration of Conformity
is not issued according to EMC law and the Machinery Directive. The Declaration of Incorporation shall apply.
Sources: EMVG (Electromagnetic Compatibility of Equipment law), guidelines on the application of Directive
2014/35/EU, Directive 2006/42/EC.
wireSENSOR, WPS

Notes on CE Marking

Page 9