Operation; Operation And Maintenance; Liability For Material Defects - MICRO-EPSILON WireSensor Series Instruction Manual

Operation

5.
For draw wire sensors with potentiometer output (P) or encoder output (E) there are no adjustment and set-
ting elements.
6.
The measuring wire, the wire drum, the spring motor and the potentiometer may not be greased or oiled.
The notes on wire guiding, see Chap. 4.3, must be observed during operation.
Imperfect wire guiding can lead to increased wear and premature defects.
The warranty and all liability claims are null and void if the device is manipulated by unauthorized persons.
Repairs are to be made exclusively by Micro-Epsilon, see Chap.
7.
All components of the device have been checked and tested for functionality at the factory. However, if de-
fects occur despite our careful quality control, MICRO-EPSILON or your dealer must be notified immediately.
The liability for material defects is 12 months from delivery.
Within this period, defective parts, except for wearing parts, will be repaired or replaced free of charge, if the
device is returned to MICRO-EPSILON with shipping costs prepaid. Any damage that is caused by improper
handling, the use of force or by repairs or modifications by third parties is not covered by the liability for mate-
rial defects. Repairs are carried out exclusively by MICRO-EPSILON.
Further claims can not be made. Claims arising from the purchase contract remain unaffected. In particular,
MICRO-EPSILON shall not be liable for any consequential, special, indirect or incidental damage. In the inter-
est of further development, MICRO-EPSILON reserves the right to make design changes without notification.
For translations into other languages, the German version shall prevail.
wireSENSOR, WPS
Operation

Operation and Maintenance

Liability for Material Defects

8.
Page 36