Updates And Service Packs For Windows; Patches And Service Packs For Security Manager; Usernames And Passwords - Cisco UCS C Series Quick Start Manual

Updates and Service Packs for Windows

The high-end hardware configuration (24 GB RAM, 7 x 500 GB HDD) provides support for 150 devices.
This configuration is suitable for a medium enterprise deployment. The maximum number (cumulative)
of events per second supported is 10,000 events per second [this value is a 9:1 ratio of syslogs to IPS
SDEE (i.e., 9000 syslog + 1000 SDEE)].
Cisco does not recommend (1) attempting to expand the capabilities of the high-end hardware
Note
configuration (24 GB RAM, 7 x 500 GB HDD) by adding licenses or hardware or (2) otherwise
attempting to change the license configuration or hardware or both; the Bundle was tested as shipped.
Updates and Service Packs for Windows
Your new Bundle was shipped to you with current Windows updates installed.
Also, Windows Update was set to "Check for updates but let me choose whether to download and install
them."
Tip To change the Windows Update setting, select Control Panel > System and Security > Windows
Update > Let me Choose My Settings.
As the administrator of the Cisco UCS Server which forms part of this Bundle, you are responsible for
the necessary updates and service packs for Windows. Cisco does not provide Windows updates or
service packs.

Patches and Service Packs for Security Manager

Your new Bundle was shipped to you with current Cisco Security Manager patches and service packs
installed.
Service Pack 1 for Security Manager 4.3 is pre-installed in your new Bundle.
Note
As the admin user of Security Manager installed on this Bundle, you are responsible for the necessary
patches and service packs for Security Manager. Cisco does not install them for you or notify you.
If you have a valid Cisco Service contract, you will be able to upgrade the Cisco Security Manager
software from Version 4.3 to a future version.

Usernames and Passwords

Windows:
•
•
Security Manager admin:
•
Cisco Security Manager 4.3 UCS Server Bundles Quick Start Guide
6
Default Windows username/password: Administrator/cisco@123
To change the Windows username/password: Follow the procedures published by Microsoft for
Windows Server 2008.
Default Security Manager admin username/password: admin/cisco@123
78-21007-01