Measurement Value Table; Comment - InfraTec VarioCam Operating Instructions Manual

11.6 Measurement value table

®
IRBIS permits the definition of ten measuring points and two measuring areas. In order to display the
measured values, a measurement value table can be overlaid in the work area via the menu item
"Measurement Values" in the "View" menu.
Fig. 173 Measurement value table

11.7 Comment

The file format of the thermal image files allows saving a comment on recording the image. This comment
is displayed in the comments field if it was activated via the "Comment" menu item in the "View" menu.
Fig. 174 Comments field
84 © InfraTec GmbH 2007
Operating Instruction for VarioCAM® head
11 Software IRBIS®
Operating Instructions