Installation Of Firewire-Drivers For Variocam ® Head With Dcam-Support From Firmware-Version 2.094 - InfraTec VarioCam Operating Instructions Manual

Operating Instruction for VarioCAM® head
9 Hardware and Software Installation
9.4 Installation of FireWire-Drivers for VarioCAM
DCAM-support from Firmware-Version 2.094
®
The VarioCAM head with DCAM-support and the PC/Notebook should be connected with the delivered
FireWire (IEEE 1394) cable. After the VarioCAM
PC/Notebook via FireWire (IEEE 1394), the camera will appear under device manager of Microsoft
Windows XP Professional (see Fig. 128 / Fig. 129
the first installation.
On other operating systems, e.g. Microsoft
appear under device manager as "JENOPTIK L.O.S. GmbH VarioCAM" (see Fig. 127) by the first
installation. The procedure is however the same as by "Generic 1394 Desktop camera".
Fig. 127 Device manager of other operating systems, e.g. Microsoft
®
VarioCAM head
Operating Instructions
®
head with DCAM-support is connected to the
page 60) as "Generic 1394 Desktop camera" by
Windows 2000, VarioCAM
© InfraTec GmbH 2007
® head with
®
head with DCAM-support will
Windows 2000 with connected
59